Kman
Full Access Member
What's your VIN so I don't happen to buy your ride in the future?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Wow. I would never do that to my Denali but to each is own... Why weren't the front tires spinning? I always thought that the Denali/Escalade AWD system would spin both fronts when the rears were spinning?!?!
No, 2WD and 4WD.for all of you that are wondering why the front tires are not spinning you have just seen the difference between awd and 4wd...and good old traction control...the reason why denalis and Eskys are not meant to leave the pavement.
I guess I was expecting to get flamed when I posted this.
I know how to off-road and have other cars/trucks for that but this was just a spur of the moment mistake. I have been off-roading multiple times in the Denali..this time I just took the hill at a low speed and didn't lower my tire pressure as I was in the middle of nowhere.
People say the same thing about my Range Rover (and other luxury SUV's), but IMO an SUV is made to drive this way.
A suv is not made for that at all bro especially not a 7000lbs Denali try a jeep or buggy not a damn Denali wtf #failoftheweek
Some clean shots of the truck
quit blasting on the man. its his ride and his money hes spending. If he wants to F it up its his business. I fucken hate when people tell me why I take my kon through some little mud and spin my tires in a little dirt. I like offroading and its my truck. I wouldnt do it to anybody elses ride but my truck that I bought with my own Money!!!
haha had to take that off my chest.
Sent from my iPhone 4g using Tapatalk
Wow. I would never do that to my Denali but to each is own... Why weren't the front tires spinning? I always thought that the Denali/Escalade AWD system would spin both fronts when the rears were spinning?!?!
Some clean shots of the truck
4wd all wheels are engaged all the time. You have to manually engage 4wd and stays engaged until deselected.
Awd is basically a assist type drive system or auto 4wd. awd designs differ from make to make, But most act primarily as a Rwd or Fwd and when it detects Slipping, It would engage the other set of wheels to Help assist with traction. Once slip is no longer detected it would return to mostly fwd or rwd setup. the front wheel wasn't spinning Probably because it was buried so deep it couldn't move, or that the Fluid in the transfer case got so hot, that it wouldn't allow the awd to engage.
---------- Post added at 08:41 AM ---------- Previous post was at 08:37 AM ----------
Nope wrong, AWD does not act as fwd or rwd and then detect slipping and engage. they are always engaged but have some kind of mechinism to allow the front and rear to spin a different speeds so the drive line does not bind up on dry pavement. while there are different designs for sure ( open differental, viscous coupling, torsen, clutches ect. ) the current bogwerner AWD in the denalis/esky IS THE WORST OF THEM ALL aka open differental type. if the front had traction and the rear didnt, then it sent all the power to the rear and you went no where. the older denalis used the NVG 149 AWD case which used a viscous coupling so no matter what it would still send power to the front, and was a much better case ( but maybe not as smooth making a uturn on the street ). We got hosed with this case with out a center diff locking option. you could have tried to use the parking break to send power to the front which might have helped if you didnt dig your self down to the frame. but oh well.
Ive been wanting to try to see if there is a way to swap in a NVG149 inplace of ours but its the wifes car and she doesnt wanting me messing with it. im sure i could fit it in there but the question is how to connect it to the 6speed tranny.
I thought they have auto-locking differentials. Did I misunderstand the dealer?
Nope wrong, AWD does not act as fwd or rwd and then detect slipping and engage. they are always engaged but have some kind of mechinism to allow the front and rear to spin a different speeds so the drive line does not bind up on dry pavement. while there are different designs for sure ( open differental, viscous coupling, torsen, clutches ect. ) the current bogwerner AWD in the denalis/esky IS THE WORST OF THEM ALL aka open differental type. if the front had traction and the rear didnt, then it sent all the power to the rear and you went no where. the older denalis used the NVG 149 AWD case which used a viscous coupling so no matter what it would still send power to the front, and was a much better case ( but maybe not as smooth making a uturn on the street ). We got hosed with this case with out a center diff locking option. you could have tried to use the parking break to send power to the front which might have helped if you didnt dig your self down to the frame. but oh well.
Ive been wanting to try to see if there is a way to swap in a NVG149 inplace of ours but its the wifes car and she doesnt wanting me messing with it. im sure i could fit it in there but the question is how to connect it to the 6speed tranny.