Wheel offset

[HokieHigh]

A +22 offset in 24's will these tuck on a 3/5 kit or not, I'm not great with wheel backspace any help would be great. Thanks

---------- Post added at 03:05 PM ---------- Previous post was at 02:09 PM ----------

I tried a search and am still curious any help please

 

[MOBmentality]

I think so .. are they 9.5s or 10s?

i can tell you for sure.. pinnacle shield 24s catalog number p27 only comes in one offset.. and i KNOW they tuck.. but i cant remember the offset.. so if you can find that then you have a good answer... .sorry.. best i can do

 

[HokieHigh]

i think they are 10's but thanx for the help

 

[BOSS]

Just barely tuck yes...might have a slight rub

B

 

[clean454]

is there a way to figure out what off set is?
i have no idea what my off set is
and they dont tuck major cutting

 

[HokieHigh]

Mob and Boss again thanx for the help

 

[BOSS]

is there a way to figure out what off set is?
i have no idea what my off set is
and they dont tuck major cutting

Yes look at the back of the wheel, it's typically engraved on the backside somewhere. You might google your wheel and see IF they have the offset engraved on the wheel first.


B

 

[jdpromo33]

So am I right in thinking a higher number offset (i.e +40mm) sits under the arch more than say a +12mm which would stick out more?

 

[clean454]

Yes look at the back of the wheel, it's typically engraved on the backside somewhere. You might google your wheel and see IF they have the offset engraved on the wheel first.


B

thanks B
im gunna check that out tomorrow!