I have just recently purchased a CCM Level Kit for my '08 LTZ. I've decided to get some 295/55/20 Nitto Trail Grapplers. Now I just need to decide on a rim size. I want to go with the rim that requires the least amount of trimming. My options are a 20x8.5 with a +10 OS, a 20x8.5 with a +35 OS, or a 20x10 with a -24 OS. Any suggestions on what would make this job the easiest? Thanks.
Wheel Help for 295's and CCM Kit
- Thread starter cameronda
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
White07Tahoe
Full Access Member
I don't know much about rims and spacing but if your that worried about trimming, just go with a different size tire. I have 305/55/20 on stock LTZ rims and I haven't trimmed anything yet and i drive it everyday with no problem. I do have some rubbing but only at almost full lock and its not hurting anything by rubbing accept scratching the plastic fender lining. I do cringe when it rubs but I have been too busy to trim it. Its not like on truck where the tire rubs on the medal bumpers or body and messes up the tire. IMO you will not regret going big but you will regret it if you get something too small. So, Go big and never look back!!
Similar threads
