DaRosa218
The Dude abides
Thanks, I decided to fix it and not sell it now that I'm not so frustrated. So expect a long write up on changing front end components 
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ajaxnxs
Full Access Member
completed the vent caps
Looks good man!!!
Removed my rear vent caps so i can paint them. Is there a write up on this? Gdddup, did you have to sand them first? What grit did you use?
Started sanding my roof rack and the feet now that the paint is off.
Started sanding my roof rack and the feet now that the paint is off.
DaRosa218
The Dude abides
Priced all the parts to fix the Tahoe. $200 to rebuild the front end..... Not to bad
- Joined
- Jan 3, 2011
- Posts
- 50,943
- Reaction score
- 19,372
Priced all the parts to fix the Tahoe. $200 to rebuild the front end..... Not to bad
Can't get away with much cheaper than that
Glad that you're going to fix it 
yukon2004
Full Access Member
Priced all the parts to fix the Tahoe. $200 to rebuild the front end..... Not to bad
Awesome!
Night Fury
Full Access Member
Priced all the parts to fix the Tahoe. $200 to rebuild the front end..... Not to bad
mharders
Full Access Member
completed the vent caps
Damn! Those look great!! Was it hard to do. I've never worked with fiberglass but this makes me want to try.
chauncey0337
Full Access Member
Kyle, those look awesome. Good job.
Now let's see em mounted.
Now let's see em mounted.Southernstyle
Member
well my 01 Kon is down for the count. i blew up the transmission last weekend pulling my boat. So i went ahead and ordered a new transmission from monster trans but i think im gonna hold off on the install. i really want to do a 6.0 swap so i think my truck is going in the garage for a while. i'm going to do a 6.0 swap with new headers(long tube this time instead of shorties)BB tune and comp cam, install the trans and regear the rear endto a 3.90 or a 4.11 before it's back on the road. then the plans are a 2/3 drop on some KMC 20's(not sure which ones yet narrowed it down to 2 sets). cowl hood, billet grille, debadge and pull off door moldings, and delete roof rack and running boards, then its off to paint or atleast thats the plan. i'll keep yall posted on progress as it happens and post pics.
Big Buttons
The SS Burb
that really sucks. good luck on the upcoming adventures. keep us updated and lots of pics
Southernstyle
Member
damn good job on those vent caps gdddup!!! they look real good.
605Jake123
Full Access Member
Installed some LED puddle lights. Going to order the interior dome lights when i get a chance.
Southernstyle
Member
thnx biggins im gonna need all the luck i can get and i'll post pics as i go
felixgun
Full Access Member
That looks real good Kyle! Your car would look clean if you de-mould and add just the chrome strip oem trim without the body color moulding. The doors underneath the nbs moulding is soooo clean.
Your truck looks great gdddup! I can't wait to see how mine looks when I finally get a set of those NNBS 20s, more low and the bootleg esky roof rack mod.
Back on topic, I replaced the driver side rear window reg in my truck. It took over a week to get to the house, but it only took about an hour and a half to R&I so whenever the others decide to quit, I'll be able to handle those too.
Back on topic, I replaced the driver side rear window reg in my truck. It took over a week to get to the house, but it only took about an hour and a half to R&I so whenever the others decide to quit, I'll be able to handle those too.
Similar threads
