Dylan
Full Access Member
Drove it to buy a HD2 for a friend
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
amaz
Full Access Member
I sold my Tahoe today... Tomorrow I'm gonna go and buy Cadillac BLS
Thumper8302
Full Access Member
AquinoSteven
Key and Spacer Guru
Painted my lower valence black along with all my fender flares. Clayed, polished, and waxed. And now its raining..... great.
JennaBear
Resident Ninja
Sold it.
Thumper8302
Full Access Member
u sold it?
JennaBear
Resident Ninja
Yep.
took and rolled my truck onto the trailer. Drove to TN for a show. Rolled it off the trailer, cleaned it. Put it back on the trailer, got home rolled it off the trailer into the shop and thats where it rests for another who knows how long.
Thumper8302
Full Access Member
just get tired of it or.............
JennaBear
Resident Ninja
Getting ready to move, so we are thinning the herd. I will get something new once we have moved.
Last edited:
NJ04HOE
Full Access Member
I replaced my serp and a/c belts.
Took it for a ride and somebody asked me if my wheels were 26's.....made me feel good for a minute until I thought how much better I would have felt if could have answered YES!
Took it for a ride and somebody asked me if my wheels were 26's.....made me feel good for a minute until I thought how much better I would have felt if could have answered YES!
Things I did this weekend.
1.Removed the Onstar antenna from the third row window
2.Removed the SLT from both sides
3.Had 5% tint put on the back three windows and legal on the front two
4.Previous owner replaced driver side mirror with a chrome covered mirror, so I took the cover off removed the chrome tape and painted it white to match the passenger side
1.Removed the Onstar antenna from the third row window
2.Removed the SLT from both sides
3.Had 5% tint put on the back three windows and legal on the front two
4.Previous owner replaced driver side mirror with a chrome covered mirror, so I took the cover off removed the chrome tape and painted it white to match the passenger side
ypsetihw
Full Access Member
I just did a sneak attack High-4 Mod on my GF's Tahoe woOt . . . used the DIY and it was cake, easiest truck mod ever
AquinoSteven
Key and Spacer Guru
put 20% on my front 2 windows today
Stockfornow
Full Access Member
Took my intake tube off, took some measurements for a DIY tube, and put the stock tube back on.
Anyone ever build one? I have for my Buick with some PVC elbows and a coupler and hope I can do the same for the truck...
Anyone ever build one? I have for my Buick with some PVC elbows and a coupler and hope I can do the same for the truck...
ypsetihw
Full Access Member
Anyone ever build one? I have for my Buick with some PVC elbows and a coupler and hope I can do the same for the truck...
based on what you can find here, you can slap a 4" filter (K&N, etc., anything at your local parts store) right on the MAF where the airbox used to be. This is probably the easiest way to build an open element short ram intake. Pros: super easy, cheap, no water danger, sounds good at WOT, better throttle response. Cons: potentially sucks in warm air, so by itself isn't going to help your peak HP numbers or anything, if you get a filter that needs oil, it could kill your MAF, get a dryflow
A step further might be an ebay intake for around $100 that puts a silicon elbow on the throttle body and has a large diameter straight tube with MAF adapter. These are still usually SRI style, not CAI style into the fender, but they are a straight smooth, large diameter tube and replace the weird stock plastic baffling under the hood. Pros: better than a filter on the MAF, still cheap. Cons: warm air problem again, and if you go ebay, make sure the filter is legit, or it can mess you up.
Final and WORST option: take your wallet, shove it up nethers, crap out a bunch of money, and buy a name brand "intake" and have a "professional" install it. You can replicate/improve-upon pretty much any intake design for under $100 if you work smart.
IMHO the best solution is some sort of ebay/homebrew combo, perhaps ebay tubing with a good filter in the engine bay with some sort of heatsheild (I've heard mini-kegs work great . . .). I would never recommend paying the ridiculous ticket price for the major brand intake systems. A pipe is a pipe is a pipe I say, do it yourself!
Similar threads
