What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Woodblocker55

Full Access Member
Joined
Apr 13, 2019
Posts
673
Reaction score
422
I think I’ll do this easy enough. Could just hot glue the bulbs in there, and good to go.
Thanks!
I bought a new switch for lights and there was no light there either . Is there supposed to be ?

Sent from my LGL84VL using Tapatalk
 

ivin74

05 NBS Nali
Joined
Aug 3, 2014
Posts
2,420
Reaction score
2,557
Location
Htown, Texas
Here is how it looks lit up. I didn't take any pictures of how I mounted the LEDs, but I could probably find some time to open it up and take some if anyone is interested.

img_20190628_205206021-jpg.225766
I bought a new switch for lights and there was no light there either . Is there supposed to be ?

Sent from my LGL84VL using Tapatalk

Not sure, but @DougAMiller added a light there and it looks real good lit up.
 

Woodblocker55

Full Access Member
Joined
Apr 13, 2019
Posts
673
Reaction score
422
I never knew there was a orange light by auto either.. I don't have that on my new switch either.

Sent from my LGL84VL using Tapatalk
 

dszx13

Full Access Member
Joined
Apr 8, 2017
Posts
262
Reaction score
604
I'm not a mind reader, did put new wheels or removed the roof rack?
Rack has been off for a couple years. Wheels have been on for a few months. Haven’t really done anything to it lately. Barely even drive it lol


Sent from my iPhone using Tapatalk
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
45,012
Location
Li'l Weezyana

915_Tahoe

Your GM Parts Specialist
Joined
Jul 1, 2018
Posts
1,439
Reaction score
2,163
Location
HELL PASO, TX
Looks like a mix of the catchcans.com one and the $15 one from Amazon. It'll "work" fine, and even better if you put a stainless scrubber pad (like a Chore Boy) on top of that plate with the holes in it.
Sounds good think im gonna do it, ill just have to plug the center don't need 3 lines coming out of it.
 

SnowDrifter

Full Access Member
Joined
Sep 5, 2016
Posts
2,484
Reaction score
2,896
Location
Sasquatch Country
Found why my right side high beam was inop

Replace with some vled micro extremes. Nicer units than what I had for sure. Output is the same. Beam pattern a wee bit different. Have yet to drive the car, just did yonder driveway checks. But meh, it works. Was hoping they would be brighter than what I had given a hundred dollar price different, but I suppose build quality is enough. More metal, less plastic, proper sealed power supply end, fans move more air too.

Old on left, new on right. Don't ask what the left is, ya can't get em anymore lol

20191227_194531.jpg 20191227_193921.jpg
 

Joe yukon

TYF Newbie
Joined
Apr 13, 2019
Posts
14
Reaction score
11
Also did my map lights with LEDs. Mucho better. Has me pretty seriously considering going around the rest of my rig with them. No pics because no one really cares(or so I think) but meh, this thread is like my de facto maintenance log lmao.
Need pictures here I'm listening ..[emoji106]

Sent from my LG-H900 using Tapatalk
 

ivin74

05 NBS Nali
Joined
Aug 3, 2014
Posts
2,420
Reaction score
2,557
Location
Htown, Texas
Also did my map lights with LEDs. Mucho better. Has me pretty seriously considering going around the rest of my rig with them. No pics because no one really cares(or so I think) but meh, this thread is like my de facto maintenance log lmao.



I did all the interior lights and it looks badass, You should do it.
 

Sam Harris

Elite Member
Supporting Member
Joined
Sep 26, 2018
Posts
7,445
Reaction score
14,977
Location
Texas
Also did my map lights with LEDs. Mucho better. Has me pretty seriously considering going around the rest of my rig with them. No pics because no one really cares(or so I think) but meh, this thread is like my de facto maintenance log lmao.
We always want pics!
 

Forum statistics

Threads
137,786
Posts
1,992,248
Members
102,780
Latest member
ASG-MikeS

Latest posts

Back
Top