What did you do to your NBS GMT800 Tahoe/Yukon Today?

[iddqd]

I installed filters in PS system. Also, I flushed said system and replaced a PS fluid with Redline FULL Synthetic PS fluid.

I fabricated filter brackets from junk yard parts. One of them is a fuel filter bracket from some *** car, and the other one is a fuel filter bracket of Tahoe.


View media item 27205View media item 27204View media item 27203View media item 27202View media item 27201

 

[00'BlueSteel]

Re-torqued front spacers after putting 120 miles on them, will check again at 250 miles.

Here’s my trick for torquing lugs on front spacers when you don’t have someone else to hold the brake pedal.

 

[Rocket Man]

Re-torqued front spacers after putting 120 miles on them, will check again at 250 miles.

Here’s my trick for torquing lugs on front spacers when you don’t have someone else to hold the brake pedal.
View attachment 203683

Also for changing hubs.

 

[00'BlueSteel]

Also for changing hubs.

How do you get a socket on the hub nut, wouldn’t it be behind the pipe?

 

[Rocket Man]

How do you get a socket on the hub nut, wouldn’t it be behind the pipe?

I just orient the pipe a bit different, on 2 studs that are closer together. It doesn't need to go all the way across. There's just enough room that way. The pipe needs to be smaller; it goes to the outside of 2 studs and to the inside of a stud in between those 2.

 

[HiHoeSilver]

How do you get a socket on the hub nut, wouldn’t it be behind the pipe?

Like yo.

 

[HiHoeSilver]

Worked on the bumper again. Talked it over with @05Single a bit. Here's what I did:

Cut a wedge for the extra on the denali part.

Once it's pulled it will be pretty close...

Busted out the iron and welded a bit...

That's it for now. Driving around without the top cap again. Lol.

 

[Tonyrodz]

Worked on the bumper again. Talked it over with @05Single a bit. Here's what I did:

Cut a wedge for the extra on the denali part.
View attachment 203696

Once it's pulled it will be pretty close...
View attachment 203697

Busted out the iron and welded a bit...
View attachment 203698

That's it for now. Driving around without the top cap again. Lol.

Coming along.....

 

[00'BlueSteel]

Like yo.

View attachment 203695

Word, I really need to find my larger pry bar it’s the perfect size for that. It grew legs a couple months ago and haven’t seen it since lol

 

[ArcticYukon]

Like yo.

View attachment 203695

 

[Rocket Man]

Like yo.

View attachment 203695

As they say, a pictures worth a thousand words brother. Nice.

 

[HiHoeSilver]

Word, I really need to find my larger pry bar it’s the perfect size for that. It grew legs a couple months ago and haven’t seen it since lol

That's 1/2" rigid in my pic.

 

[Rocket Man]

That's 1/2" rigid in my pic.

Jesus how small is it soft?

 

[HiHoeSilver]

Jesus how small is it soft?

She didn't complain. A small acorn grows into a mighty oak!

 

[Rocket Man]

She didn't complain. A small acorn grows into a mighty oak!

 

[Tonyrodz]

Jesus how small is it soft?

 

[Tonyrodz]

Picked the Hoe up today. We'll see what happens.

 

[95escahoe]

Had the windshield tinted 50%, came out mint, best $135 I’ve spent on the truck

Sent from my iPhone using Tapatalk

 

[Tonyrodz]

Had the windshield tinted 50%, came out mint, best $135 I’ve spent on the truck

Sent from my iPhone using Tapatalk

Looks good. Wish I could do that to mine.

 

[Countryboy07]

Definitely doing this to mine once I get the windshield replaced.