What did you do to your NBS GMT800 Tahoe/Yukon Today?

[osiris94ej]

Wet sand with soapy water with 800 grit, 2 light coats. One med to heavy coat. Waiting for that to dry to peel masking and clear the whole lense.

Sent from my SM-N920V using Tapatalk

 

[BADRIDES]

Wet sand with soapy water with 800 grit, 2 light coats. One med to heavy coat. Waiting for that to dry to peel masking and clear the whole lense.

Looking good

 

[M1Gunner]

I'm swapping the Esky interior into the Hoe...started out with the dash, it was a perfect fit...next I'm going to swap the leather power/heated seats for the manual cloth seats.

I know I'm going to have to run wire for the power seats but would anyone happen to have a schematic for an '02 Esky to make life easier when it comes time to figuring out which wires does what in the seat harness?

View attachment 83215

View attachment 83216

Would this lil fella help ya out?
There's others for memory seats and some other features. I'm not sure what all you're gonna need but here's the basic for starters.

 

[M1Gunner]

Threw together some home made gap guards for the front fenders due to the 3in body lift...
Found some wheel well liners from a u pull it to cut and fit. Help to keep factory lines.

Whatchyall think???

EDIT: sorry some pics are apparently upside down... can't do nothin right...

 

[95escahoe]

Three together some home made gap guards for the front fenders due to the 3in body lift...
Found some wheel well liners from a u pull it to cut and fit. Help to keep factory lines.

Whatchyall think???

View attachment 83233

View attachment 83234

View attachment 83235

View attachment 83236

View attachment 83237

EDIT: sorry some pics are apparently upside down... can't do nothin right...

Looks great


Sent from my iPhone using Tapatalk

 

[M1Gunner]

Looks great


Sent from my iPhone using Tapatalk

Thanks brother!

 

[Tonyrodz]

I think we'll both have to make do, I was just looking at that and they look close enough to be made to work

Does the hd Hood have a liner at all? If not maybe use some cardboard as a template then trace it on the Tahoe hoodliner.

 

[#1taho]

Just finished putting on my tow mirrors before it started raining cats and dogs. Didn't have time to wire up the indicators, unfortunately.
View attachment 83226 View attachment 83227 View attachment 83228

Look at that HD hood !!!!!

 

[#1taho]

Does the hd Hood have a liner at all? If not maybe use some cardboard as a template then trace it on the Tahoe hoodliner.

I was going to do something like that. But I need the hood to be able to make something

 

[Tonyrodz]

I was going to do something like that. But I need the hood to be able to make something

Makes sense! Lol. I lucked out. I bought mine with a really good liner in it. Also had the light.

 

[MadDogDelpho]

Does the hd Hood have a liner at all? If not maybe use some cardboard as a template then trace it on the Tahoe hoodliner.

No, not the aftermarket one. But using cardboard is a good plan.

 

[PG01]

Threw together some home made gap guards for the front fenders due to the 3in body lift...
Found some wheel well liners from a u pull it to cut and fit. Help to keep factory lines.

Whatchyall think???

View attachment 83233

View attachment 83234

View attachment 83235

View attachment 83236

View attachment 83237

EDIT: sorry some pics are apparently upside down... can't do nothin right...

Looks completely factory....good job brother

 

[osiris94ej]

Wet sand with soapy water with 800 grit, 2 light coats. One med to heavy coat. Waiting for that to dry to peel masking and clear the whole lense.

Sent from my SM-N920V using Tapatalk

Sent from my SM-N920V using Tapatalk

 

[Cattivo]

Would this lil fella help ya out?
There's others for memory seats and some other features. I'm not sure what all you're gonna need but here's the basic for starters.

View attachment 83232

Thanks brother I appreciate it, I was able to get both front seats mounted and all wired up today...it was actually pretty easy to identify which wire did what using my power probe

 

[PG01]

Sent from my SM-N920V using Tapatalk

Looks good

 

[Tonyrodz]

Man, how the story has changed now. I talked to the trans guy earlier. I wanted to know when the hoe was gonna be done. I got a text on Friday or Saturday saying I should have it Sunday.... Nope! Now it's Tuesday /Wednesday.he originally told me 2 days. And now I'm staying with the 4 planteries instead of going with 6. $300 more. I just can't wait to get it back!

 

[BADRIDES]

Awesome job

 

[M1Gunner]

Looks completely factory....good job brother

Appreciate it Galante!

 

[M1Gunner]

Thanks brother I appreciate it, I was able to get both front seats mounted and all wired up today...it was actually pretty easy to identify which wire did what using my power probe

View attachment 83244

View attachment 83245

View attachment 83246

Nice! Power probes are worth their weight in gold!

 

[Cattivo]

Just finished putting on my tow mirrors before it started raining cats and dogs. Didn't have time to wire up the indicators, unfortunately.
View attachment 83226 View attachment 83227 View attachment 83228

Nice! she's looking bad ass brother!