What did you do to your NBS GMT800 Tahoe/Yukon Today?

[ATIII]

Your thoughts like mine....build one $50 hmmm lol
Does look nice, if I had the money I would get one, but also I don't do that much engine work to justify it either.

Trust me, me being lifted, working on anything under my hood requires a step ladder or sitting on the Rad support. It's a REAL PAIN IN THE ASS. I do need to finally get one.


Sent from my iPhone using Tapatalk

 

[02_Tahoe]

This was a pain in the ass

Now to paint it

 

[Tonyrodz]

This was a pain in the ass
View attachment 77624
View attachment 77625
Now to paint it

How'd you tackle it? I know there's those thick push in tabs behind it.

 

[02_Tahoe]

How'd you tackle it? I know there's those thick push in tabs behind it.

Yep that's what I did. I climbed up underneath and used pliers to squeeze the tab and reached out and pulled on the cap as I squeezed the tabs. Ended up breaking one but doesn't really matter when they put one every 3 inches

 

[02_Tahoe]

Finished the bumper

Well not completely finished just need to spray the clear coat. No I didn't spray it outside I just moved it out so I could take a picture with my truck in it. I'll post the finish product in a few hours when I'm done and the clear coat is dry. Should I do a write up for the process or does everyone kinda know already what to do?

 

[MadDogDelpho]

Looks good man! gonna be sweet!

 

[kwOH]

Finished the bumper
View attachment 77631
Well not completely finished just need to spray the clear coat. No I didn't spray it outside I just moved it out so I could take a picture with my truck in it. I'll post the finish product in a few hours when I'm done and the clear coat is dry. Should I do a write up for the process or does everyone kinda know already what to do?

Good build thread material, plus then u can do write ups on whatever u want.


Sent from iPhone 7 plus using Tapatalk Pro

 

[02_Tahoe]

Good build thread material, plus then u can do write ups on whatever u want.


Sent from iPhone 7 plus using Tapatalk Pro

I don't think I've really done enough to my truck to make a build thread

 

[05Single]

Finished the bumper
View attachment 77631
Well not completely finished just need to spray the clear coat. No I didn't spray it outside I just moved it out so I could take a picture with my truck in it. I'll post the finish product in a few hours when I'm done and the clear coat is dry. Should I do a write up for the process or does everyone kinda know already what to do?

Just give us materials used. Grit sand paper, paint, adhesion promoter, exc

 

[kwOH]

I don't think I've really done enough to my truck to make a build thread

Thats the perfect time to start so u can make a collection of what u do, do.


Sent from iPhone 7 plus using Tapatalk Pro

 

[Rocket Man]

Finished the bumper
View attachment 77631
Well not completely finished just need to spray the clear coat. No I didn't spray it outside I just moved it out so I could take a picture with my truck in it. I'll post the finish product in a few hours when I'm done and the clear coat is dry. Should I do a write up for the process or does everyone kinda know already what to do?

Good job, can't wait to see it installed.

 

[mwilson62000]

All cleaned up and new knock sensors in.

 

[mattbta]

Bought a few items off my Tahoe Stuff Amazon list: 2 Timken Wheel hubs, 2 Moog UCA's and 2 Moog lower ball joints. Hubs and BJ's will be here tomorrow but the UCA's won't arrive until Wednesday. Guess I'll put them in next weekend.

Less than 4 months ago, I replaced rotors/pads at all corners. When I saw that I'd be right in there to do ball joints/arms, decided to get the hubs too. No sense pulling that stuff a third time! Should have done it all at once when I did the brakes.

Now the only thing in that front end that won't have been replaced will be the gearbox, which I apparently need too. Maybe later...

 

[kwOH]

Quick question. How far in do the cross bars go on the esky rack all the way to the front? Like how far are they spaced apart?


Sent from iPhone 7 plus using Tapatalk Pro

 

[mattbta]

All cleaned up and new knock sensors in.

Nice! That's next on my list after this front end stuff.

 

[95escahoe]

View attachment 77639 All cleaned up and new knock sensors in.

Make sure to put rtv around the knock sensors like the TSB states


Sent from my iPhone using Tapatalk

 

[HiHoeSilver]

I figure they were same same. Might have to try the duplicolor.
You see the glow in dark plastidip?

Worst video and application ever. But have ideas

Hmmm...

 

[Rocket Man]

Got my new Corsa knock-off exhaust tip welded on by an exhaust shop.

 

[05alive]

Just bought the topside creeper. Well worth it!!

Want one so bad

 

[05Single]

Lookin clean on them 15s