What did you do to your NBS GMT800 Tahoe/Yukon Today?

[#1taho]

I would check back with Nelson. I think they hook up differently. I read people has some issues hooking up aftermarket harness, not just nelsons.

 

[95escahoe]

Ordered the GM all lights on module from Fleece


Sent from my iPhone using Tapatalk

 

[a4edwin]

I didn't get it new I got it as part of a turbo kit I bought which included the harness and the fans. Just ordered a new one from nelson.

 

[95escahoe]

Installed a Airaid MIT, cleaned the MAF and TB too

Factory intake setup

The TB all cleaned up

MAF back on

All done

Sent from my iPhone using Tapatalk

 

[Rocket Man]

I didn't get it new I got it as part of a turbo kit I bought which included the harness and the fans. Just ordered a new one from nelson.

I got mine from LS1fans.com and it was great quality, no problems with it .

 

[jarydM]

Bought a set of these to give a bit better look, and a bigger wheel for lift ( later) and larger tires (eventually)

 

[a4edwin]

Just got the new one from Nelson today. The new one compared to the old one looks completely different. Like homemade to professional different. Prob won't have time to switch them today but ill post as soon as I do

 

[mattbta]

Finally installed new GM lower and upper intermediate steering shafts put in. Put the dorman bearing in and it was a PITA to get in, the bearings kept coming out inside the plastic. Also attempted to put in a delco steering position sensor, but it wouldn't go in all the way and I inadvertently broke the little tab off. Gave up and put it all back together without sensor for now. Trying to decide if I want to take it somewhere and if so, also get a delco bearing.

 

[eohat]

Just finished a ZW7 Smooth Ride delete on my ’01 Tahoe with Z71 springs, lift keys and new shocks.

 

[Smoke Em All]

Well I pulled the wheels on my 05 to do a new brake pad swap and realized my old brakes were fine. The shim was rubbing the rotor causing the squeal. Also finally got around to scraping the plasti dip off the roof rack. Still needs some cleaning but looks a lot better.


Sent from my iPhone using Tapatalk

 

[Smoke Em All]

Forgot the pic!


Sent from my iPhone using Tapatalk

 

[kwOH]

Forgot the pic!


Sent from my iPhone using Tapatalk

2 thumbs up. [emoji1303][emoji1303]


Sent from my iPhone using Tapatalk

 

[1992rs]

Installed my cognito brace on my idler arm side. The hellwig sway bar mounts farther away from the oem one so I was able to get the brace in there and it's millimeters away from sitting on the bar. It just might hit at full lock but they'll work themselves out.

I took a trip to the other side of Portland and was amazed at how nice it rode even on the poorest of roads. Bumpsteer is down to almost nothing, drives straight, rides smooth as glass, steering is pin point precise. My rig is starting to shape up to a nice driving truck.


Sent from my iPhone using Tapatalk

 

[#1taho]

It has arrived !

 

[Fosscore]

Forgot the pic!


Yes!! That looks 100% better with those 805s!!

 

[Tonyrodz]

It has arrived !View attachment 69904

 

[05Single]

Took out the blue led city lights and put in red leds. Big changes over here lmao
(retrofit in the near future)

Almost december in Alaska and we have zero snow on the ground

 

[Knope]

Replaced the license plate light assembly and added LED bulbs. So bright!

 

[osiris94ej]

Ran out of daylight and never got a finished picture. But they are finally mounted up.

Sent from my SM-N920V using Tapatalk

 

[Smoke Em All]

You didn't like the U2s?


Sent from my iPhone using Tapatalk