Wanted: NNBS power retractable assist steps SWB

[JohnC]

My son has been looking for one of these for months, and I thought I would try and help him out...


http://detroit.craigslist.org/mcb/cto/4414514620.html


Just thought this would be the best place to ask...

If you have power retractable assist steps for sale for a Short Wheel Based Yukon or Tahoe let me know

Thanks

 

[JohnC]

Can anyone post this in the Wanted section for me? Just trying to help my son out...thanks.

 

[JohnC]

Anyone?

 

[NathanJax]

So you WANT the powered steps, correct?

Best thing to do is check eBay or Craigslist. Only people here that have them and want to keep them. Most people who have them don't want to get rid of them


I moved it to the wanted section though and fixed the thread name and details.

 

[THE YETI]

you're going to have a heck of a time retrofitting the OEM steps into a vehicle that did not have them from the factory (not sure if this is what you are trying to do).

I'd suggest avoiding any issues and getting into a set of AMP Research steps. There is a lightly used set on ebay right now: http://www.ebay.com/itm/AMP-Researc...Parts_Accessories&hash=item338eddbe8d&vxp=mtr

These are generally much easier to work with and the wiring is already there.

 

[Goodinblack]

There is a company that makes the electronic for the OEM steps.

Baggedintegra did it

 

[THE YETI]

There is a company that makes the electronic for the OEM steps.

Baggedintegra did it

i didn't want to get this thread off topic, but yes he did, but the guy also did it as a prototype. I believe he was considering on mass producing the wiring, but not sure if it ever took off. Did not want to confuse the OP...

 

[Goodinblack]

i didn't want to get this thread off topic, but yes he did, but the guy also did it as a prototype. I believe he was considering on mass producing the wiring, but not sure if it ever took off. Did not want to confuse the OP...

He did and its still available.

I can't remember the name of the small electronics company...

Member Blazed my buddy Josh has the name of the company

 

[THE YETI]

Ah good to know!

As long as its PNP and they warrant it, rock it!

 

[Blazed]

He did and its still available.

I can't remember the name of the small electronics company...

Member Blazed my buddy Josh has the name of the company

I doo

KP Technologies

RUNNING BOARD CONTROLLER

I've exchanged emails with Kp tech and they seem confident that it will work with the power assist steps but won't promise anything however it is the same company that made BaggedIntegra's.