Triple Alt Install

[NoPh33rRaCiNg]

Figured i'd show you guys some pics. I got my bracket from tejcurrent. It can hold 2-3 alts, whichever you choose to run. The kit with all of the hardware and long belt is 330 shipped without alts.

Tejcurrent pointed me to a sweet deal on brand new factory 130 amp alts for 66 bucks a piece that im running for now (speedycarparts.com), along with my powermaster 240amp one i've had for a bit. It'll give me about 500amps max of power. The instructions were very good, along with pictures.

The bracket took about 4-5 hours just to get everything correct. Relocate the "brain" a few inches forward and zip tieing some hoses out of the way. I assembled EVERYTHING on the bracket before i lifted it all into the truck, takes 2 people to get it lined up correctly.

And here is a mark i drew on the tensioner, just with the 1 alternator and factory belt. Just to see how much more tension was on it after the 3 alts and new belt. Not too bad at all, i've seen some peoples installs where their tensioner is maxed out.

 

[Rivieraracing]

That's very impressive!!

 

[Young28]

wow very nice

 

[NoPh33rRaCiNg]

Thank you. I am very pleased with this kit. DC power and mechman both wanted 400+ for their triple kit's. Some people have had a hard time getting in contact with tejcurrent, but he has replied to all my email's within the same day I would recommend him to any of you guys wanting a kit for your trucks. The first kit he sent out, USPS lost it so we had to communicate a lot through that mess but he fully insured it and sent another kit out.

 

[TnTahoe]

great install and deal

 

[Sir-Lancelot]

NICE!

Troy is good people and has been great to deal with from my experience. I am running his quad bracket on my Yukon with my old stock, an Irragi and 2 of Troys. Holds in the 13v range at full tilt at idle. Hopefully when I add another of his alts, I can hold in the 14v range. All day demos.

 

[NoPh33rRaCiNg]

NICE!

Troy is good people and has been great to deal with from my experience. I am running his quad bracket on my Yukon with my old stock, an Irragi and 2 of Troys. Holds in the 13v range at full tilt at idle. Hopefully when I add another of his alts, I can hold in the 14v range. All day demos.

Sweeet. I feel like the quad setup would be even more of a pain to install! I was running one powermaster 240a alt built by mechman, redtop optima up front and 1 kinetik 2000 and 1 kinetik 2400 in the rear before with my RD D9 @ .5 ohms (5400rms). full tilt playing for 30secs at the least would dip to 11volts.

I was testing my batts before i started the truck with the new bracket and my kinetik 2400 was dead, sitting at 9 volts. I junked that and got a optima yellowtop to replace for the show this weekend. So now with the 1 powermaster 240a alt and 2 stock gm 130a alts, 1 redtop, 1 kinetik 2000 and 1 yellow top, at full tilt it barely dips below 13v. A BIG difference. After the show this weekend im gonna sell all my batt's and switch to something else. And selling my RD D9 for 2 4k's

 

[gdddup]

wow thats bananas

 

[thehoe92]

very nice install Ryan!
I bet its a lot more violent with the voltage steady at 13v
lets see another video

 

[NoPh33rRaCiNg]

very nice install Ryan!
I bet its a lot more violent with the voltage steady at 13v
lets see another video

Ill probably have some vids monday. And I'll be back to Cali soon. Looking for the right show, have to manage my vacation time at work.

 

[sumo]

Crikey that cool as hell

 

[killer20072001]

tejcurrent has great stuff and I also had very good experiance with him buying one of his old iraggis from his tahoe. I would recomend him to anybody.

Sweet setup man!

 

[cotton]

that badass

 

[alacran]

that bracket looks nice and beefy. i have an extra alt sitting in my garage now i just need the extra money for the dual alt kit.

 

[NoPh33rRaCiNg]

It's def a nice kit, cheaper than a few other brands. I got 2 first places in my classes this weekend, my voltage was definitely improved.

 

[Max]

Looks dope Thanks for the link I'm gonna scoop a new alt for my truck so I can finally install my pulley and dual batt setup.

 

[NoPh33rRaCiNg]

Looks dope Thanks for the link I'm gonna scoop a new alt for my truck so I can finally install my pulley and dual batt setup.

No problem, love your denali

 

[mason313]

Nice I'm deff gunna have to get one for my rebuild I'm about to start. I'm doing 4 dc level 4s on 2 crescendo 3ks I got a mechman 270a now and I'm pretty sure I got a stock alt in my garage.

 

[Frathoe TFM]

Looks absolutely awesome. I've got one stock alt in right now and another in the garage. now to buy a highpower alt and that mount. Good stuff man.