Question about my barn doors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mranum

Member
Joined
Jan 14, 2013
Posts
38
Reaction score
1
I contacted my local dealer yesterday about new pins and bushings for my '95 Tahoe rear cargo doors and after about 5 min. he comes back and says that they have been discontinued for the '95 & '96 models. Apparently the '97 and later were different?? He seemed genuinely stumped and didn't have any other options for me.

Now, if aftermarket houses don't have 'em and I can't get it from the dealer.....? Has anyone ever checked to see if the pins & bushings from a van are the same??

:think:
 

Donnie Yukonie

Yates Caretaker
Supporting Member
Joined
Jul 31, 2011
Posts
5,125
Reaction score
161
I don't see how they would be different from that period of time I could be wrong . Have you tried LMC ?
 
OP
OP
M

mranum

Member
Joined
Jan 14, 2013
Posts
38
Reaction score
1
Yeah I did, only side doors listed that I could see.
 

Donnie Yukonie

Yates Caretaker
Supporting Member
Joined
Jul 31, 2011
Posts
5,125
Reaction score
161
No Problem , Most of the time they will add notes To the parts if they only Fit certain years I.E dash differences in 95-99 , I would give them a Call to be safe they will know
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
184
Location
unknown at this time.
i will check with gm right now....

---------- Post added at 07:41 PM ---------- Previous post was at 07:25 PM ----------

just to be clear these are the barn door "hinge" hardware correct not the door catch mechanism? either way i got gm part numbers and source for them.
 
OP
OP
M

mranum

Member
Joined
Jan 14, 2013
Posts
38
Reaction score
1
i will check with gm right now....

---------- Post added at 07:41 PM ---------- Previous post was at 07:25 PM ----------

just to be clear these are the barn door "hinge" hardware correct not the door catch mechanism? either way i got gm part numbers and source for them.

Pins and bushings for the "barn door" hinge.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
184
Location
unknown at this time.
http://www.genmotorinfo.com/Picture.../REAR+ W/ZW9 +-+CK 06-16 +&pid=961217TZC16-15

#69 bushing gm 15995442 $3.02 each

#63 & 70 pin gm 15645336 $2.80 each

gmpartsgiant.com just enter the part numbers where asked. also there application is 92-95

---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------

or take part numbers directly to dealer and tell them "how you like them apples!"
 

Forum statistics

Threads
129,330
Posts
1,814,053
Members
92,463
Latest member
willabea
Top