NORCAL SS 1-2.5/3.5-4.5 2wd/4wd kit.

[NORCAL SS]

Yes last day is the 31st

 

[1badtahoe24]

can you post some more pics of that car if you have them please?

 

[Rpav]

One thing I haven't seen addressed is when lowering with 5305 is the rear hardware kit needed besides the shorter end links?
Thanks!

 

[NORCAL SS]

when you do my rear set up and no spacers yes you will need endlinks/my bumpstops and cut bracket off frame. No way around it unless you dont care about bouncing all over the place

 

[Rpav]

For sure, I understand we need end links but what I am asking is do we need the trailing arm brackets?

 

[NORCAL SS]

No. If you go over 4 5 yes

 

[SixFootSix]

 

[1badtahoe24]

Norcal, do you include good instructions in your kit? I want to buy it and take it to my mechanic to have it installed, but I know you have some custom touches with this kit. i just want to make sure its all laid out for him.

 

[NORCAL SS]

yes instructions are there.


google tahoe free travel mod that is needed in rear for bracket. Its pretty easy install

 

[GMMillwright]

Finally had a chance to take a picture or two since being lowered. Looks like the rear is lower than the front, but truck isn't running, so no AutoRide. This is 1.5/4.0, give or take. 4wd.

 

[NORCAL SS]

the rear spacer used?

 

[Cmicasa the Great XvX]

All I want is a smoother ride in the rear without lowering. Current situation over bumps. Setup is trailering, 20inch wheels, with autoride. If I just changed the shocks I'm gonna get the service codes. Is the bumpy ride coming from the shocks or the springs?

 

[NORCAL SS]

Without lowering... good luck

 

[GMMillwright]

the rear spacer used?

I believe so. I didn't do the work.

 

[2016YUKONSLT]

Tony, do you still do this kit? 2016 SLT 4x4

 

[NORCAL SS]

yes i do

 

[2016YUKONSLT]

What is the difference between this one and the other thread that needs new spindles?

 

[NORCAL SS]

4x4 kit rears same just front uses relocaters or I can set up with drop struts

 

[2016YUKONSLT]

Not sure I understand the difference. I have a 4x4 and would like a 2/4 drop and hope it levels out some.

 

[NORCAL SS]

if your 4x4 and want 2 inches i would do drop struts and the camber kit thats 275. then in rear you can do my 3.5-4.5 kit which is 360 shipped and you will need to cut the bracket off the frame and bam ready to roll