No 2nd gear

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kevin21

TYF Newbie
Joined
Nov 11, 2023
Posts
6
Reaction score
0
My transmission fluid got about 2 quarts low, and I lost 2nd gear. I have refilled the fluid and still no second gear. I was thinking it could be the solenoid? thank you in advance.
 

NickTransmissions

Sin City
Supporting Member
Joined
Mar 9, 2023
Posts
1,383
Reaction score
3,560
Location
The transmission bench
My transmission fluid got about 2 quarts low, and I lost 2nd gear. I have refilled the fluid and still no second gear. I was thinking it could be the solenoid? thank you in advance.
What transmission? And do you simply not upshift (ie it remains in first) or does it upshift and feel like it's in neutral?

Is your CEL illuminated?

Did you confirm your fluid level is at the full hot mark on a level grade at operating temp.

Lastly, Why do you think its a solenoid problem?
 
OP
OP
kevin21

kevin21

TYF Newbie
Joined
Nov 11, 2023
Posts
6
Reaction score
0
What transmission? And do you simply not upshift (ie it remains in first) or does it upshift and feel like it's in neutral?

Is your CEL illuminated?

Did you confirm your fluid level is at the full hot mark on a level grade at operating temp.

Lastly, Why do you think its a solenoid problem?
CEL is not on, I'm just guessing on the solenoid.
 
OP
OP
kevin21

kevin21

TYF Newbie
Joined
Nov 11, 2023
Posts
6
Reaction score
0
It won't go into 2nd downshifting or upshifting. Under hard Acceleration It feels almost like it's going into neutral. When first gear red lines, it shifts directly to 3rd
 
OP
OP
kevin21

kevin21

TYF Newbie
Joined
Nov 11, 2023
Posts
6
Reaction score
0
How do I figure out what transmission I have?
 

NickTransmissions

Sin City
Supporting Member
Joined
Mar 9, 2023
Posts
1,383
Reaction score
3,560
Location
The transmission bench
I'm out...its like pulling teeth to get any information out of you.

Generally a neutral condition in a given gear indicates applied element failure meaning you need to yank it for overhaul.

Drop the pan and see what's at the bottom. Burnt clutch/friction material means rebuild time.
 

Forum statistics

Threads
138,152
Posts
2,000,606
Members
103,078
Latest member
Docpreston
Back
Top