New to the Board!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

nv6425

Full Access Member
Joined
Feb 18, 2010
Posts
62
Reaction score
0
Hello all,
I'm new to the forum (was over at GMFullSize and then found this forum) and recently picked up a 2009 Tahoe LT3. That being said, it's time to get some mods going!

First off, it's a 2009 Tahoe LT3 Black/Black and I think I want to put a nice 2/3 drop and some 24"s on it. I'm looking for a very classy look, more sport truck than bling bling and whatever I do has to be extremely low maintenance and daily driver friendly. I have already debaged and color-matched my bowties and would like some opinions on a drop and wheels.

To give you some idea of where my tastes lie, I'm a huge fan of billett wheels like the Rushforth Wildsides (1), but don't want to pay $1K per wheel. I'm heavily considering the Dub Dirty Dog 6 (2), but would like some other opinions on what to do. Thanks in advance, I look forward to becoming an active member of the forum!

1
wildside.jpg


2
DirtyDog-C-6-500.jpg
 

nytahoe

"Tha Butcha"
Joined
May 14, 2009
Posts
2,198
Reaction score
6
Location
new york
welcome t the forum im over at gmfs also. this id more of an suv forum. with that said post up some pics and i like the 1 st or rims better.
 

GalaxyBlackEsky

BlackedoutLT3
Joined
May 13, 2009
Posts
2,524
Reaction score
12
Location
MD
Welcome and I would go with the 2nd set. I like the 1st but I think it is to much of a deep dish and the rims just look small like that. I would go with a 2/3 spindle kit.
 
OP
OP
N

nv6425

Full Access Member
Joined
Feb 18, 2010
Posts
62
Reaction score
0
Thanks guys! Your Tahoes look awesome! What type of suspension would you go with for the best ride quality?
 

Effeckt

Resident Cards Fan
Joined
Jul 31, 2009
Posts
2,193
Reaction score
32
Location
Phoenix, AZ
Welcome to the forum. I'm also on GMFS but rarely visit over there as this forum fulfills what I'm looking for. First wheels get my vote but I think both of them would look good. Congrats on the recent purchase!

:welcome:
 

Conor

"Bob's your Uncle"
Joined
Apr 30, 2009
Posts
1,103
Reaction score
2
Location
Seattle, WA
If you want a classey look, stay away from anything DUB. If you can afford $1K a wheel look at Lexani, Momo, Auto Couture or anything from Modular Society, HRE, IForged, Asanti, Vellano or anything forged.

---------- Post added at 05:03 PM ---------- Previous post was at 05:03 PM ----------

Also, I like the top wheels better, except for the hub. 24's should not have a hub sticking out in my opinion
 
Last edited:

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
109
Welcome on man, I agree on going with a 2/3 spindle/coil drop to get good comfort, Belltech 3" drop coils ride the best after the Pedders 3" rear coils.
Also like said above, stay away from DUB if you want classy, ther wheel are alright and all but the name of the company is whack to me!
And all the wheel that Conor posted are expensive as hell, all starting well above $1000/wheel so I don't know if you really want that.
Try brands like Dropstar, KMC, American Racing and Giovanna Group (Also known as WTW wheels) whole wheel line.
 
OP
OP
N

nv6425

Full Access Member
Joined
Feb 18, 2010
Posts
62
Reaction score
0
Thanks for the warm welcome guys! There is obviously alot to learn before I start modding my Tahoe, but this seems like the right place!

I'm not keen on spending $1K/wheel at all and would love to be able to get away with $3,500-$4,000 for rims, tires and the drop. The pics above represented the kinds of wheels I like - I actually love #1, but they are $1095/wheel and I'm just not spending that kind of cash. Per your recommendations, I looked at American Racing and stumbled upon the KMC Brodies which are available in chrome and matte black, see the pics below, what do you think? Anyone know how big the lip is on these?

Chrome
KMC671C-large_image-1109.jpg


Matte Black
KMC671B-large_image-1109.jpg
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
109
THose look pretty good in the black, I would get them along with some Nitto 420s tires.
I have not heard/seen those wheels, but as long as they look good that is a good thing, so atleast you know they are not too common!
 
OP
OP
N

nv6425

Full Access Member
Joined
Feb 18, 2010
Posts
62
Reaction score
0
Modded - from your previous post, you said to go with coils, should I not do a spindle up front and then a rear coil? I'm looking for the best riding and reliable suspension, is that Pedders (no spindles), McGaughy's, Belltech?

Thanks again!!
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
109
Yeah I said do a spindle and coil setup.
So bascially coils out back, and spindles up front for the best ride.
The Pedders coils for the rear will give you a 3.25" drop and they ride better than any other 3"+ drop coil on the market for these Tahoes, run $180 shipped if I remember right.
Then buy McG spindles for the front portion, those run $230 from Tim the vendor, you you will be facing a bit over $400.
 
OP
OP
N

nv6425

Full Access Member
Joined
Feb 18, 2010
Posts
62
Reaction score
0
Gotcha, do I need a shock extender or new shocks in either the front or the back?
 

turboeclips

Full Access Member
Joined
May 16, 2009
Posts
475
Reaction score
1
Location
Austin, TX
Welcome to the Forum!

Those KMC Brodies look ok, never seen them before. The Dirty Dog 6 get my vote though, I have always been a fan of those.

As for the drop, if you plan to keep the stock shocks, then shock extenders will be required.
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
109
I say get s/e, the ride will be better if you do but just slightly.
When I had my Pedders kit I ran them without s/e for a month and they still rode real nice, the s/e made them ride just a tad better, but then again the extenders help the shock weat like they do on a stock Tahoe, which is a plus.
That would be all you need.
 
OP
OP
N

nv6425

Full Access Member
Joined
Feb 18, 2010
Posts
62
Reaction score
0
Thanks turboeclips - wish I would have joined a month earlier, I saw that you just sold your Momos....which 26" did you go with?

Modded - thanks again!

I'm going to try to find some more pics of the Brodies, preferably on a truck to see what they look like!
 

NASTY GM

Full Access Member
Joined
Jun 15, 2009
Posts
780
Reaction score
313
Location
Nor Cal
I have 26" Dub Bombers and have no complaints about them. Wheels are like cars everyone has their own opinion.
 

Attachments

  • pics 007.jpg
    pics 007.jpg
    90.4 KB · Views: 33
  • pics 016.jpg
    pics 016.jpg
    94.9 KB · Views: 23
OP
OP
N

nv6425

Full Access Member
Joined
Feb 18, 2010
Posts
62
Reaction score
0
NASTY GM - those 26" look sick! How much did you drop it and how is the ride quality?
 

NASTY GM

Full Access Member
Joined
Jun 15, 2009
Posts
780
Reaction score
313
Location
Nor Cal
NASTY GM - those 26" look sick! How much did you drop it and how is the ride quality?

Thanks! The front is just over 3" and the rear is 4". It rides pretty good, not like stock. If ride quality is an issue for you don't lower truck or add 26's.
 

David4Jesus

Full Access Member
Joined
Dec 24, 2009
Posts
182
Reaction score
2
Location
Augusta, Ga
Welcome aboard, I like both wheels up top but the first ones seem more classy and the second more sporty but both are in good taste for your ride
 

turboeclips

Full Access Member
Joined
May 16, 2009
Posts
475
Reaction score
1
Location
Austin, TX
Thanks turboeclips - wish I would have joined a month earlier, I saw that you just sold your Momos....which 26" did you go with?

Unfortunately looks like I will be rolling on the stock 20s for a while. We had some increased expenses come up, so the wife has purchases on lock down.

For those that don't like the Dirty Dog 6's maybe these will change your opinion... :)

38115310034_large.jpg


38115310011_large.jpg
 
Last edited:

Forum statistics

Threads
138,108
Posts
1,999,263
Members
103,033
Latest member
JasonW4141
Back
Top