Need help wiring escalade Bvlgari clock.

[denalianyone]

I just received my escalade bvlgari clock and connector. The connector has three wires and did not come with any instructions. I cant find any tutorials online to installing this. Did anyone do this mod b4? Any help will be greatly appreciated.

 

[Grebbler]

I have never seen the clock. If it's just a normal clock I would assume the leads are Ground, B+ for clock and the last lead for the light to tie into the dash dimmer circuit.

 

[denalianyone]

The clock is standard in the 02-06 escalade models, incorporated into the power/storage section of the center console. Thanks for your quick advice.

 

[ndavis0001]

what color are the wires? power, ground, dimmer...

 

[denalianyone]

the wires are all white, which make it more difficult to figure out.

 

[ndavis0001]

well you could do a soft test... run your 3 wire leads and test this to that and this to that until you pinpoint which are which...

in the meantime ill try to find you a diagram... im bored

 

[Anthony]

*Any updates to this?*

I just got an Escalade console (Clock area+ Cup holders +Clock) off eBay and looking to have the correct wiring to make ti work in my 2004 tahoe. Any input please?

 

[denalianyone]

I used the wiring diagram from alldata. Ill try and post the pic later tonight.

 

[Anthony]

I used the wiring diagram from alldata. Ill try and post the pic later tonight.

That would be PERFECT! Thanks!

 

[Anthony]

I used the wiring diagram from alldata. Ill try and post the pic later tonight.

Can you post it please

 

[fatnlowtahoe504]

anthony, put up pics of the console when you put it in...

 

[Anthony]

anthony, put up pics of the console when you put it in...

Will do, You looking to get one?

 

[Anthony]

Anyone?

 

[denalianyone]

here ya go...crappy iphone pic

pin#1 battery positive
pin#2 ground
pin#3 Inst panel supply voltage

 

[Anthony]

here ya go...crappy iphone pic

pin#1 battery positive
pin#2 ground
pin#3 Inst panel supply voltage

Thanks!

Also, Chistoso PM'ed me this info:

There are three wires on it, orange, black and grey.
The grey one is for the illumination
the black is ground
the orange is for constant 12v.

Great to have all this info in 1 place