Memphis mojo and down for sound 07 Tahoe build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50
Joined
Jun 12, 2020
Posts
2,101
Reaction score
5,232
Location
Eastern North Carolina
Just wanted to share my build for the Tahoe
Isn’t completely finished yet and not to many pics yet either until I’m done
So far I have a kenwood double din ddx3

I threw some Memphis audio m6 coaxial a in the rear door
Memphis tweeters in the dash

Just ordered some down for sound 6.5s I you don’t know about these speakers check em out there stupid loud crystal clear holds a whopping 200watts rms per speaker
My buddy put two in the front doors with 2 tweeters in the back and it can be heard a quarter mile up the road easily

mids amp will be the factory Bose for now but will be replaced with a down for sound 400w with all new wires going to all the doors

for the bass I have a Memphis mojo 15” 2200w rms 4400w max
Pushed by a 1000w old school Memphis prx (10+yrs old)
Debating on upgrading the amp to a down for sound jp23 2300watt so I can see just how loud I can get the sub to go.

big 3 upgrade this week and looking into a 270amp alternator to upgrade too
Then whenever the battery goes I’ll upgrade it to a xs power one more then likely
All work has been done myself
 

Attachments

  • C746694D-7AEC-416D-8800-34D751B937DA.jpeg
    C746694D-7AEC-416D-8800-34D751B937DA.jpeg
    22.1 KB · Views: 19
  • 630310B4-7EA2-4BC5-BAFA-16A7803FC53E.png
    630310B4-7EA2-4BC5-BAFA-16A7803FC53E.png
    1,012.8 KB · Views: 18
  • E889AB20-64E7-451A-BE47-1CE62E7C523D.jpeg
    E889AB20-64E7-451A-BE47-1CE62E7C523D.jpeg
    988.1 KB · Views: 16
  • 96ACC1D7-CB5C-46D7-9643-B382EDED2590.png
    96ACC1D7-CB5C-46D7-9643-B382EDED2590.png
    521.3 KB · Views: 20
  • 4E11018F-9961-41F8-ACE5-277459F5D207.jpeg
    4E11018F-9961-41F8-ACE5-277459F5D207.jpeg
    356.4 KB · Views: 20

Loud03denali

TYF Newbie
Joined
Jul 11, 2021
Posts
7
Reaction score
5
Just bypass the factory amp. No need to run new wires through the doors. The existing wire will be fine for around 200w
 
OP
OP
Trey Hardy

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50
Joined
Jun 12, 2020
Posts
2,101
Reaction score
5,232
Location
Eastern North Carolina
I will be getting the jp234 amp 800watts between the 200+ watt door speakers and 150/175w mids and tweeters
 

Loud03denali

TYF Newbie
Joined
Jul 11, 2021
Posts
7
Reaction score
5
Yeah you should still be fine on factory wiring. I’m pushing close to 500w per door on the factory wiring. I have went past what is technically recommended but will redo my wiring once I go bigger with the doors. I have 2 prv 8s in each front door and 6.5s in the rears. Working on trying to get my sub box built but it’s a slow moving process for a bigish build
 
OP
OP
Trey Hardy

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50
Joined
Jun 12, 2020
Posts
2,101
Reaction score
5,232
Location
Eastern North Carolina
I have the Rockford fosgate power tweeters and coaxials in my Silverado about to get some down for sound 6.5 for it.
4 Memphis mini mojo 8”s in a ported under seat box
With the jp23 2300w for subs and the jp234 800w for the mids
Im excited to get these two builds finished up
 

Loud03denali

TYF Newbie
Joined
Jul 11, 2021
Posts
7
Reaction score
5
I’ll be running a sundown sfb 500.4 to my doors and trying to get my 6th order c pillar wall built. It will be 4 sundown xv3 15s on a sundown salt 8
 

Kyle187

TYF Newbie
Joined
May 5, 2019
Posts
9
Reaction score
2
hell yea dude , im a newer member but im running 4 psi platform 5 18s on 4 digital designs m5s in my 07 yukon xl, no wall legal. quad alternators-external regulator, lithium, super caps

if ya need any help send a message
 

09_4WD_YUKON

Full Access Member
Joined
Mar 23, 2018
Posts
194
Reaction score
124
hell yea dude , im a newer member but im running 4 psi platform 5 18s on 4 digital designs m5s in my 07 yukon xl, no wall legal. quad alternators-external regulator, lithium, super caps

if ya need any help send a message
Got pics? Would love to see that!! I'm running (2) Skar DDX 15 on a JP23 with stock BOSE high for now. Got some Fosgate 6.5" for the doors that I have not put in yet...want to get a amp for them b4 I put them in.
 

Attachments

  • 20210329_175433.jpg
    20210329_175433.jpg
    154.5 KB · Views: 9
  • 20210329_175441.jpg
    20210329_175441.jpg
    231.7 KB · Views: 9
OP
OP
Trey Hardy

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50
Joined
Jun 12, 2020
Posts
2,101
Reaction score
5,232
Location
Eastern North Carolina
Finally burnt my old Memphis amp up just got my down for sound equipment in the mail and should have it in the Tahoe by July 4th these speakers and amp are incredible for the price and the quality is top notch you can literally hear the two door speakers from a block away easy without a amplifier just whatever the Kenwood double din puts out!27B1CF41-95C4-4221-81C1-C07517E7F5EB.pngE9233E3E-695F-41D2-A111-1F10526543BA.jpeg
 

Forum statistics

Threads
129,117
Posts
1,810,714
Members
92,204
Latest member
22loweryak

Latest posts

Top