Lower more front suspension on ppv 2007-2014

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

88mike

TYF Newbie
Joined
Feb 5, 2025
Posts
10
Reaction score
4
Location
Northwest
wassup ppv guys, so i got my ppv this week, 204k odo, 2014 ppv 2wd, came with the correct tire size 265/60/17, i say that cuz I’ve seen so many different modifications pd does to theirs. Like I saw one using 265/70/17 tires on and was 2wd not the ssv. Anyways driving it back home i noticed how i couldn’t see much further away from behind me the road, i mean when looking on the center mirror that gives view of the back liftgate, it would kind of cut the further portion of the road behind me. I figured it out being this way because the rear is level to the front. And it also makes me think that maybe the reason the other versions of the tahoe having the rear raised up a little for towing also maybe was planned in a way the rear window have just enough openings for see the rear through the mirror. I might not make much sense in my explanation. I have better time explaining in audio. Anyways. I want to lower more at least the front. Being used to
Drive trailblazer 2007 , it’s also weird having the front hood taller. I can still drive fine but wife will struggle.
With all this blah blah here. I just would like have some advice on how to
Lower the front. The ride i felt driving the ppv was fine, i just would like to keep it the way it is on the handling side, if the ride gets more quiet and not so bump is not bad, if doesn’t change is fine for me. I just don’t wanna more bumpy or noise while cruising in the highway. Iam having some electrical issues that i read on thread here and will try follow those directions to
Fix. If not i come back here.
Even tho is high mileage it works smooth no weird. Noise in the engine, not yet!, one good think it came with all seats , and even has the third row, how? No idea but the floor is rubber as ppv and even the vin brings up the trim police vehicle on search. The second row seems be leather like LT or LTZ, and not vinyl as ppv usually has. And the dash miraculously doesn’t have any cracks, yet!
Going outside right now to tune with diablo and disable the afm. Hope engine stays good
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,651
Reaction score
2,301
Location
Virginia
I’m not sure which front spindles goes on a ppv but changing that keeps your suspension geometry in tact. Call Belltech or McGaughy. They’ll know what you need.
 

Forum statistics

Threads
134,906
Posts
1,910,693
Members
100,249
Latest member
losloho02
Top