Light bar mounted need help with idea for switch

[Bharding]

New owner with my first mod

42" aux beam led light bar mounted behind the grill.


Now just needing ideas on how to power it via the wiring harness. Switch or with fogs?

 

[Ridechevy09]

I'd stick with a switch

 

[Bharding]

Any ideas on where to mount it?

 

[Ridechevy09]

It's a crappy picture but this is where I mounted mine, but I plan on putting four more light bars on my Tahoe so instead of having five switches I'm going to put a main switch under the mounted to the side of my console. That's something to take into consideration, if your only going to mount one bar then I'd put it here, but if you plan on doing more I'd install it in a place where you can put a control box that's not in the way of things. Such as, on the side of my console

 

[Bharding]

Anyone else have any placement ideas?

 

[01Konvict]

Get a small round rocker switch and mount it inside one of the aux power plugs below the radio

 

[gibbygsxr]

I wired mine to come on with the high beams. No holes in the dash, no wires to run in the car and no ugly switch.

 

[fiatdale]

If you want it to look stock... get an overhead console from a Silverado / Sierra that has the spot for the roof light switch, then wire it into that.