LED dash pics and specs and crap

[TahoeGoBoom]

my issue isnt the voltage, my question is wtf is goin on with my oil pressure. lmao. i thought it zero'd out, guess not. lol.
i need to get better pics. every bulb looks like an off white. really annoying. they look nothing like that...

 

[haks310]

I'll do a list or at least a partial list of all the interior and exterior bulbs and a quantity of everything tomorrow, on my phone right now so it would be a hassle. See if I can can take some nice pics this weekend also.

Depends what color you wanna go with. A white LED will make the teal pop and shows it's actual color the blue LED will make it a darker teal. I would go with the white LEDs if it were me.

The gear indicator should be a T1.5 but dont quote me. Take a picture of the back of the gauges if you can and I'll let you know.

 

[AtomicHoe094]

Heres a couple. front and backs to everything.. And the gear indicator has built in LEDs into the circuit board, i can take a pic if anyone wants to see. so no worries on the gear indicator.. idk why i put tranny then??? weird




---------- Post added at 09:33 AM ---------- Previous post was at 09:30 AM ----------

I'll do a list or at least a partial list of all the interior and exterior bulbs and a quantity of everything tomorrow, on my phone right now so it would be a hassle. See if I can can take some nice pics this weekend also.

Depends what color you wanna go with. A white LED will make the teal pop and shows it's actual color the blue LED will make it a darker teal. I would go with the white LEDs if it were me.

The gear indicator should be a T1.5 but dont quote me. Take a picture of the back of the gauges if you can and I'll let you know.

Hey, now since i have the original HVAc controls in my truck and those are like white face, should i put Blue leds in those??? bucz then it would be a waste is my leds weren't all the same color

 

[TahoeGoBoom]

I got you with the list haks..
Gaugues- (6) 194s
Hvac- (4) T1.5
Light switch- Neo 4
door lights- (4) 194
floor lights- (2) 194
window/lock switches- (3) neo3, (2) neo4
dome light- (2) festoon 4410 x 9
glove box- (1) 194

i think that covers the interior. minus the individual dash indicators which all tend to be T1.5.

Haks, double check all that for me. thanks. lol

 

[DJTricky]

lit-up dashes, ceilings, doors and sub enclosures here

lol i was showing the outside bulbs are all 194's in the headlights and stuff, then there is the sub box and such, i can get more pics of JUST the stuff you listed, sorry lol

 

[haks310]

Wow that looks more blue than teal. I think you can sand it down until you get them clear, that "white face" look. You'll be able to get all your blue LEDs and have them all match.

And here's the list, I also started a new thread for it.

Exterior
Low Beam: 9006 - 2
High Bean: 9005 - 2
Fog Lights: H3 - 2
Parking Lights/Turn Signals: 1157 - 4
Corner Lights: 194 - 2
Third Brake Light: Assembly
Tail Light: 3157 - 2
Stop Light: 3157 - 2
Back up Light: 3157 - 2
License Plate: 194 - 2


Interior
Gauges: 194 - 6
Indicators(instrument panel): T1.5s - 16 total, but will vary depending on how many indicators you have operational.
HVAC Controls: T1.5 - 4
Ash Tray: 194 - 1
Glove Box: 194 - 1
Headlight Switch: NEO4 - 1
Door Lights: 194 - 4
Floor Courtesy Lights: 194 - 2
Driver Switches: NEO 4 & NEO 3 - 1 Each
Front Passenger Switches: NEO 4 - 1
Rear Passenger Switches: NEO 3 - 2
Dome Lights: 211 - 2
Map Lights: 194 - 6

 

[AtomicHoe094]

lol i was showing the outside bulbs are all 194's in the headlights and stuff, then there is the sub box and such, i can get more pics of JUST the stuff you listed, sorry lol

just playing with ya. i like the lights, but your damn pictures are sooo damn big. it kinda drives me crazy.. lol

 

[DJTricky]

lol sorry bro cant do much about it. But im gonna be taking the pics vary soon. Just got a new cam.

 

[foreverfalcon40]

Questions...where are the floor coutesy lights? When I got my only the door panel lights work.

I like to Keep my HAV orange too. To show Contrast in color (from hot to cold), plus when I hit the A/C button I'd like to keep the indicator that the A/C on is Orange. But I want the rest blue. Which one's do I replace to Make the HVAC light up Blue but keep the indicators orange/red?

---------- Post added at 01:00 AM ---------- Previous post was at 12:59 AM ----------

I have an esky clip...What LED can I put in my turn signals to make them BLUE or Red (not sure what I wanna do yet)

 

[mikeykey]

Whew....take a breath in between questions.....!

I'll tackle one question for you.

Questions...where are the floor courtesy lights? When I got my only the door panel lights work.

If you don't know what your looking for, you could miss them. They are just under the bottom corner of each side of the dash. The mounting plate is almost visible without bending over. The bulbs don't actually go into any type of lense, rather just plug into the socket. I'll snap a pic if you still can't find um.

 

[Whippled2dr]

Quick question on the color to get for my bulbs when i do this..
I have the escalade gauges meaning the board is that blue color. Should i get a white or straight up blue? would orange do something crazy with the blue board?? thanks guys

It will look like this if you use white LEDs with the 120mph escalade/denali cluster.

 

[AtomicHoe094]

It will look like this if you use white LEDs with the 120mph escalade/denali cluster.

thats sick!!! what did you do with the HVAC cluster as well?? blue or white?? do u like your gauges how they are with the white im em?

 

[TahoeGoBoom]

i have blue in my HVAC and you can still tell the contrast change from hot to cold.

 

[haks310]

If you have ever opened up you gauges completely you'll see that every indicator is painted a different color...battery is red, turn signals are green and so on. They did this so they would not have to use different colored bulbs for each application and just use white bulbs for everything.

Noooooow, if you wanted to switch the color of something you would be able to. Like FF40 mentioned making the turn signals blue or red. You would have to take your gauges completely apart, remove the lens, needles...blah blah blah. Then you would pry the backing off, the backing is what all the numbers and so are printed on, you would have to turn it over and you will see that the turn signals are green, just sand them down until they are see through, now you can put in blue or red LEDs and you will now have blue or red turn signals.

Yeah, confusing I know. I'll see if I pry mine apart and take some pictures. Is not as complicated as it sounds.

 

[AtomicHoe094]

i got some pics of mine if you want em, bcuz i know its a pain in the ass to just go out an do for no reason.. but what a waste. lol.. i want the blue flow in my hoe.. i have that blue pioneer headunit so it would all go nice together..

 

[haks310]

Yeah like on your cluster you have that teal color, you can sand that down till you get it clear and get some blue LEDs and you would be set. You can throw blue LEDs in there but the teal would wash them out a bit

 

[AtomicHoe094]

no no im keeping mine teal.. lol thats waaay to much work for my gauges.. lol.. and possibly could be a lootttt of trouble.. yikes no thanks!>. haha

 

[the big blue bus]

looking to do this to mine since about half of the lights are burnt out. i only want to do the guages heater controls and 4wd indicator since thats burnt out, and its dark down there at night. i want to do blue ones and from reading this should i do the blues for the guages or white to get the blue look? also whats the size for the 4wd indicator? i say thats all i want to do now but im sure down the road id do doors and other lights too. radios half burnt out but im getting a alpine headunit so not worried about that.

heres my list. does it look right?
T1.5 Instrument LED bulb x4
WLED-x5 LED Wide Angle LED bulb x6
what else do i need for the 4wd on floor

 

[haks310]

Lol damn, way to bring back an one year old thread.

Here you go, this was on the first page:
http://tahoeyukonforum.com/forum/showthread.php?t=1352

And list looks good.

 

[the big blue bus]

Lol damn, way to bring back an one year old thread.

Here you go, this was on the first page:
http://tahoeyukonforum.com/forum/showthread.php?t=1352

And list looks good.

haha sorry didnt want to start a new thread for it. how much did it cost yall to do just dash and heater, cart shows around 30 right now not with 4wd light.

so the 4wd is just 2 194's should i just get same ones as im gettin for guages? they are kinda spendy at 3.74 per bulb.