Hi

[mesailingbum]

I’m new to this site . Have a 2010 Avalanche but just got a 2014 GMC Yukon Denali . And already needing assistance finding the second wire to hook to the fuse box studs.
It was easier to find the one down below the brake reservoir tape to a harness which I was able to bring up with the smaller eyelet. But the one along an offender is not there. I looked everywhere. My 2010 Chevy avalanche was similar, and I found those wires pretty quick and hooked them up and the brake controller is working perfect but on this one, there is no second wire unless it is taped inside a harness that I have to take apart alongside that fender. Any help would be good

 

[Doubeleive]

it should be down there between the fuse box and fender, use a flashlight and look harder, move stuff around

 

[Fless]

See the Upfitters Guide info in the post that @mikez71 posted the other day:

Broke both fuse panel remove/install levers... don't repeat my mistake (COMPLETE/Done!)

Replacing the three primary positive battery cables w/new GM parts... should be pretty easy, right?! The cable that runs from the positive battery terminal to the underhood fuse panel requires the fuse panel be extracted as it connects to a conductive "finger" on the underside of the fuse...

www.tahoeyukonforum.com

 

[OR VietVet]

Welcome to the forum, from Oregon.

Free Car Service Manuals from LEMON Manuals

LEMON Manuals provides free repair/service/workshop manuals for about 10,000 US and Canada market vehicles from 1960-2025. No sign-up, no paywall!

lemon-manuals.org.ua

This link may also help track the wire, start to finish.

 

[Joseph Garcia]

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please. If we can't see it, it does not exist.

You are already receiving sage advice from the knowledgeable folks on this Forum.

Also, we have a Dogs and Puppies thread, so please post a photo of your dog in that thread.

 

[BlackBearPerf]

Welcome to this great forum from Idaho!