emay
Full Access Member
Price Drop - $2850
Back on the block again after transitioning to my esky, time to move on to the next project. $2850 plus actual shipping to your door.
This kit was formerly Yates' - I ran it on my burban for about 5 months from April of 2012 to August 2012 - sold that truck, put the kit on my esky. Ran that from January 2013 to August 2013. Esky sold - so it's all sitting in boxes in garage.
System Description:
Full bolt on air suspension for 07+ Tahoe, Suburban, Yukon, Denali, Avalanche, Escalade and the front will work on NNBS 1500 series trucks. Yates had repowder coated the suspension parts, included new fittings and air lines, also included the front bags already mounted on struts. Your getting everything essentially refreshed as of April 2012. The kit uses sleeve bags on the front and regular bags on the rear. The air tanks, valves, and compressors all fit where your skid plate is currently located. The kit uses AccuAir E-level controls so your truck is always at the perfect ride height and also is adjustable on the fly. The kit comes with dual Viair 400C compressors and has an air dryer on it.
If you own a truck with factory air ride then the oem sensors work great with this system. Mine was done this way. If you have a non air ride vehicle then you will need to get a set of air sensors See them frequently on ebay for about a hundy for set of 4.
I can meet you somewhere if it's reasonable and fits my schedule. Willing to do a 75-100 mile radius to my home if it helps you out.
1st set of pics below are of the kit on my burban - These pics are with the rear Shock extension brackets offered by norcal. I'm not including that, but the shock extenders will net you 1 full extra inch out back and the stance will look as follows. I also removed entire bump stock bracket with plasma cutter (free travel Mod):
The Esky pics are on oem 22''s, bump stop brackets still in place but rubbers cut off entirely:
Back on the block again after transitioning to my esky, time to move on to the next project. $2850 plus actual shipping to your door.
This kit was formerly Yates' - I ran it on my burban for about 5 months from April of 2012 to August 2012 - sold that truck, put the kit on my esky. Ran that from January 2013 to August 2013. Esky sold - so it's all sitting in boxes in garage.
System Description:
Full bolt on air suspension for 07+ Tahoe, Suburban, Yukon, Denali, Avalanche, Escalade and the front will work on NNBS 1500 series trucks. Yates had repowder coated the suspension parts, included new fittings and air lines, also included the front bags already mounted on struts. Your getting everything essentially refreshed as of April 2012. The kit uses sleeve bags on the front and regular bags on the rear. The air tanks, valves, and compressors all fit where your skid plate is currently located. The kit uses AccuAir E-level controls so your truck is always at the perfect ride height and also is adjustable on the fly. The kit comes with dual Viair 400C compressors and has an air dryer on it.
If you own a truck with factory air ride then the oem sensors work great with this system. Mine was done this way. If you have a non air ride vehicle then you will need to get a set of air sensors See them frequently on ebay for about a hundy for set of 4.
I can meet you somewhere if it's reasonable and fits my schedule. Willing to do a 75-100 mile radius to my home if it helps you out.
1st set of pics below are of the kit on my burban - These pics are with the rear Shock extension brackets offered by norcal. I'm not including that, but the shock extenders will net you 1 full extra inch out back and the stance will look as follows. I also removed entire bump stock bracket with plasma cutter (free travel Mod):
The Esky pics are on oem 22''s, bump stop brackets still in place but rubbers cut off entirely:
Last edited:
