For those who are blown...

[foreverfalcon40]

What gauges should I be running...

Boost Gauge (in my A Pillar)

Wideband 02
Tranny Temp
Volts Gauge
EGT? I had to have one in my Turbo'd DSM...but now we are talkin Whipple. If I do need an EGT where do I mount it. On the DSM there was a spot for it on my Manifold which is the Header...but now I have two headers.

I just finished up piecing and painting my Escalade Center Console. I am going to build a box on an angle to house these gauges.

 

[bai78]

I personally run a vacuum/boost, fuel pressure, & wideband on my A pillar pod. They are all Autometer Cobalt digital gauges. My scangauge II handles my transmission temp, IAT's (which I relocated from the filter to just before the TB), ECT, MAP, tranny line pressure, & a few others. It is a good little gauge to have especially since you can program the xgauge feature to add things.

Do yourself a HUGE favor & do a 12200411 pcm swap. It's easy as hell & you'll wonder why you didn't do it sooner because it was sooooOOOOO easy.

 

[foreverfalcon40]

Ok..OK...

Well Bai as you know on the other forum..due to economy I lost hours at my Mod/extra cash job. The trade off is I have a day off to do things.

Yes Autometer Cobalt Series is the BEST ONE b/c it matches blue LEDS. Of course I'm going digital too it just looks cooler.

You have FP bc you have Marine?

 

[bai78]

The FP was to be in conjunction with the wO2. Fuel pressure, bad pump, etc...needed to be ruled out as a possible symptom of going lean in boost.

I know about the shop & all from the other posts....the 411 is straight forward. Acquire pcm, let Justin retune, manually repin, splice 4 wires, plug n' play.

 

[thumper_ehhhhh]

http://www.dashdaq.com/

http://www.aeroforcetech.com/

http://www.scangauge.com/

http://www.dashhawk.com/

With these you can run what ever guages you want. Some even have alarms for limits if you want to set them.