Felix's White on Tan Denali

[Neil Layne]

Majestic.

---------- Post added at 01:07 AM ---------- Previous post was at 01:06 AM ----------

Maybe one day my yukon will be that cool. Haha

 

[felixgun]

Thanks Neil. I'm sure it will be once you graduate college and get a full time job!!

 

[OHSIXX]

Loving the upgrades so far....retro looks sick!!

 

[felixgun]

Thanks bro. It really makes the back end look better with the g5 led tails and cree projector led reverse lights I just put in.

 

[Neil Layne]

Are those reverse lights expensive? One of mine just went out. Haha, did you get your 3rd brake light in yet?

 

[felixgun]

They were like 40-50 on eBay. Bought some from a US seller so they tend to be slightly better quality. But not as high end as vled. Mine have worked for a while on the escalade. I had bought cree led projectors for the Esky fogs and reverse lights. One Esky fog led projector went out after like six months but the reverse lights are going strong. And yep I received the Esky third brake light already color matched silver. Problem is if I put it in now then it'll look dumb with black Yukon appliqués so I can't put on until the Esky appliqués get painted.

 

[Ben]

You can...

 

[felixgun]

You think? Might do it now then lol

 

[Ben]

Yea why are you waiting? I'm running G5's and regular pillars because of you... Mine looks fine.

 

[felixgun]

Well you inspired me to just do it. Here ya go Ben:

 

[Goodinblack]

Yea why are you waiting? I'm running G5's and regular pillars because of you... Mine looks fine.

I did mine for almost 8 months

 

[Ben]

Felix's White on Tan Denali and Silver on Black Yukon

See why'd you wait. Looks good

You make your wife push the brakes? Lol

You need to debadge and do the gmc emblem where the Bow tie goes on the Tahoe, like Sergio did

 

[felixgun]

Nope had my friend help me lol. Wait so move the gmc logo below the rear glass? Or get a second gmc logo?

 

[Neil Layne]

no no, just move it to where the chevy emblem is on the tahoe. i was about to do it for mine but i don't know how to re-glue it back on to the area. and when sergio had it, he didn't have the gmc emblem color matched, i color matched mine except for the chrome edging, so i have no idea how it would look.

 

[felixgun]

You would just take a razor blade and cut off the old double sided 3m tape and then go to autozone and buy some fresh ones and bam fresh adhesive. Might do that tonight.

---------- Post added at 06:24 PM ---------- Previous post was at 06:18 PM ----------

What's the easiest way to remove the flex fuel logo? Bout to rip mine off

 

[07Burb]

no no, just move it to where the chevy emblem is on the tahoe. i was about to do it for mine but i don't know how to re-glue it back on to the area. and when sergio had it, he didn't have the gmc emblem color matched, i color matched mine except for the chrome edging, so i have no idea how it would look.

The red 3m double sided tape is some strong stuff! Just use that. Like Felix said, you can get it at autozone

 

[07Burb]

What's the easiest way to remove the flex fuel logo? Bout to rip mine off

Just like you'd debadge anything else. I use plastic spackle tool that is in good shape to get behind it and take it off then use an eraser wheel to remove the adhesive. You can also use fishing line

 

[Neil Layne]

felix, when i took my flex fuel off, i just used fishing line and kinda just wiggled back there. and I'm going to do the same thing probably tomorrow. but here is the link to what it looks like at the end. http://www.tahoeyukonforum.com/forum/showthread.php?t=43972

---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------

i can just take a knife to the back of the emblem to get the old 3m double sided tape off? I've been wanting to do it for so long. haha, just never knew how. and when i got in my wreck in december i almost told the guy that was putting it back on that i wanted it there, but i just didn't for some reason... stupid by my part. haha

 

[07Burb]

Yes you can use a knife or razor blade. Just be careful not to cut yourself.

 

[Neil Layne]

cool, well now i have no excuses. haha, thanks. and felix, when are your pillars going to be done?