Door panels

[TBaganATX]

Hey Guys,

I have replaced and updated my door panels on my 94 Blazer. On my driver side I have the plastic retainer clips and the one right I'm the center of the door closes to the door latch keeps popping out. Anyone had this issue or suggestion on solution. It's driving me bat shit crazy!

TIA

Tony


Sent from my iPhone using Tapatalk

 

[Big Mama]

The clip is bad or is the hole too big?

 

[TBaganATX]

They are new clips.. so it has to be a larger hole.. I have been looking larger ones, just curious what other options I have.


Sent from my iPhone using Tapatalk

 

[Big Mama]

if you can remove the clip and take it to the parts store they have a decent selection of different size clips. A somewhat temporary solution might be 3M double sided trim tape. That’s what holds the trim on the outside of your rig. It’s strong stuff.

 

[Fless]

A couple of layers of electrical tape or one layer of rubber tape over the hole -- then slice an "x" through the tape where the hole is. That might downsize the hole enough for the clip to hold.