Debagdeing/demolding

[bigblue]

I am about to debadge/demould my 07 hoe. I have searched on here and found a few results. I thought when i first joined this forum i had seen a sticky for this but now i cant seem to find it now iam actually going to tackle to job! I have heard some stuff about a 3m wheel eraser. is it this wheel here http://www.goodspeedmotoring.com/astro-eraser-wheel-400e.html

Also how do the badges come off? Are they just stuck on with 3m double sided tape? What about the door moulds also? Thanks

 

[KMeloney]

Also how do the badges come off? Are they just stuck on with 3m double sided tape? What about the door moulds also? Thanks

It's all taped on except for the front and rear bowties, which are taped AND pegged into place.

Unlike the Esky side molding, the Tahoe/Yukon moldings are just taped on with no locating pegs.

 

[Conor]

You need a heat gun first to warm and loosen them up first.

 

[bigblue]

thats kinda what i thought i just wanted to make sure once i pulled them off they wasnt pegged on and was going to have a little hole there.