So I have an idea for my cargo area since I use it to haul alot of crap that is often dirty or wet and I dont like having to scrub my carpet and be careful of the side plastic. Anyone ever rhino lined the inside of part of your truck? Im thinking pulling up the carpet, laying sound deadener then spray over that with a lining of some sort. Dont know what I would to to the back of the second row yet or the plastic molding in the back. if it works I might to all the floors like this. What do you guys think? Would it look too tackt, make it louder? any downfalls you can think of? Just thought I would see what you guys thought!
Cargo Area Idea
- Thread starter puckhead
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
fatnlowtahoe504
Full Access Member
sounds like it might be a pain in the ass, you dont have one of those big rubber cargo mats??? like such.. http://www.stylintrucks.com/parts.a...ats&canned_results_trigger=&partfamilyid=1316
Dont have one of those and have thought about it. but I usually have a partial third row in. I wonder if it would be worth it? When this one is old and I have money to buy a new one this is going to get stripped and coated inside and out with rhino lining for a sweet hunting truck, but that wont be for many years
TheFuzz
Idiot Police
That might be tough to do cleanly, but I don't think it's impossible. Not thinking that the sound deadening material is a good idea though. I don't think you'd want to spray over any kind of material that is attached to the metal via adhesive...the adhesive failing = your spray-on liner failing. That stuff needs to go onto metal. I'm pretty sure the liner in and of itself would do a pretty decent job of cancelling out noise, as it's pretty thick.
If you end up pulling this off, let me know. I'd be interesting in checking it out!
If you end up pulling this off, let me know. I'd be interesting in checking it out!
If anything on the deadener I would use Extreme Dynamat. Really sticky on the bottom and has that metal liner on the top. Wonder if that would work out? It was just an idea I had floatin around in my head and I thought I would see what some felow TYFers thought.
TheFuzz
Idiot Police
Eh, I just can't wrap my head around spraying bedliner onto a soft, non-metal surface that is stuck onto the floorboards. I look at that kind of thing from the standpoint of longevity, and two potential problems come to mind - 1, the linex or whatever you are using could have issues adhering to the dynamat, and 2, adhesives can break down over time, essentially disconnecting the linex from the truck. It's highly unlikely, but if it ever did, the bedliner would basically be floating if that makes sense.
Eh, I'm probably WAY overthinking the issue, as I usually do.
I do agree that it's a cool idea, but for me personally I'd just strip the cargo area carpet and spray it right on.
Eh, I'm probably WAY overthinking the issue, as I usually do.
I do agree that it's a cool idea, but for me personally I'd just strip the cargo area carpet and spray it right on.
Yeah you make a good point! Thats why I love this place! Get some good constructive criticism. It popped in my head and sounded awesome, lol then I started thinking it out and it gets harder. Maybe one day I will give it a whirl
tast101
Full Access Member
I think they have the cargo liner that has the cutouts for the rear bench. I could swear I've seen them before.
I will have to double check the site, might be an option when you add it to the cart too. I will keep an eye out, thanks!
Bailey-Hoe!
Full Access Member
Liner
I have the Weathertech rear liner and yes, there are pre-marked tabs built in that could easily be cutout for the 3rd row seat. Or you just quickly pull it out to re-install seat. Its easy. ITs not an option, it just comes that way. I have that line of mats throught out whole truck...love them.
BB
I have the Weathertech rear liner and yes, there are pre-marked tabs built in that could easily be cutout for the 3rd row seat. Or you just quickly pull it out to re-install seat. Its easy. ITs not an option, it just comes that way. I have that line of mats throught out whole truck...love them.
BB
sweet thanks bud! Have to check em out
MikeTheApeman
Full Access Member
If you did decide to do this, I'm in agreement that anything that uses adhesive would be a bad idea. I would go with something like Elemental Audio's liquid stuff, eDead something, then put your bedliner over it. I'm actually looking at that stuff to "paint" the inside walls of my utility room in my house, as it's right off my home office / other side of the TV wall. It'd be nice to not hear the furnace kick on when watching a movie.
True, I have used a spray sound deadened called Quiet Kote. Im still in the research part a this though, I will definitly keep everyone updated. You can do different colors of rhino lining right? I dont think I would want it black. Maybe a tan
