96 air bags ?

[Velo99et]

Newbie<--------
What are my options as far as baggin my tahoe? Can't find to much info on the web about the front end? And do I have to notch the rear? I'm not really going for low, but I'd like factory height and higher. Who am I kidding and lower

96 Tahoe 4dr 4x4?

 

[SunlitComet]

belltech has some kits that will take you down 3" in rear and 1-3" in front with just bolt on. other options too. http://www.belltech.com/products.html enter vehicle info and choose product type on the left of page afterwards.

 

[Young28]

Up front if you keep 4wd you can put bag on top of uca with bracket coming off frame. . This will basically lay you on top of tire.

 

[Velo99et]

Looks like I came to the right place!! Got some shopping to do

---------- Post added at 04:52 PM ---------- Previous post was at 03:51 PM ----------

Where is a good place to find a bracket set up or do I have to fab one up myself?

 

[Young28]

you will have to make on. yourself. Here is mine a looooonnnng time ago. Gives you a idea.

 

[Velo99et]

Nice thanks!!

 

[Young28]

anytime.

 

[SunlitComet]

now can that go from low to 4x4 stock height + a estimated 2in crank?

 

[Young28]

i wish i had pics of it fully lifted but i dont. Id say it would be close to 2-3" lift over stock height.

 

[SunlitComet]

and still drop drop a few inches below stock too correct?

 

[Young28]

yes sir.

 

[SunlitComet]

got me thinking a speed sensitive ride height control with manual inputs as well but i don't want bouncing air bag oscillations either. not likely to find a chock that will travel that far from bottom to top am i?

 

[Velo99et]

So far so good! Now do I have to notch the rear? Or can I just loose the leaf springs and bag it?