6.0 from 350 TBI

[az932drkon]

I sold the original 350/TBI out of my '93. Then had Tempe (Tempe, Arizona) Speed & Performance install a 6.0, Corvette servo and remove GM restrictions. Way more fun to drive!!! Maybe getting better fuel mileage too. Definitely money well spent. Tony specializes in LS conversions & will have a booth at the Good-Guys Car Show in Scottsdale next month. Highly recommend.

 

[WiCK3D_SiX]

How much the swap run you? I've been thinking about a 6.2 swap.

 

[07Burb]

Nice man!!

 

[the big blue bus]

ive been thinking of the 6.2 as well down the road if my motor goes. would be a lot more fun stock and could do some other work and make a good amount of power

 

[retorq]

Pics??

 

[az932drkon]

Pix & pricing

I will post pix as soon as I figure out how. Sorry. I spent under $6,000. That included the engine, wiring harness, servo, new cat and some exhaust welding, tuning & Tony's labor. I guess I could have gone 5.3 or ? & built it up but the 6.0 was available and he did it while I was in Chicago for my daughter's wedding. Hope this helps.

 

[WiCK3D_SiX]

Extremely helpful, at least for me lol.
To post pics click POST REPLY in the bottom left, below that is MANAGE ATTACHMENTS (under the window you type in) click that and a window pops up for uploading.

 

[07Burb]

Or you can put pics up on photobucket to host and throw the links with the img tags on here. Either method works

 

[retorq]

Email me the pics I'll host on one of my domains for free.

 

[99Yuk]

I will post pix as soon as I figure out how. Sorry. I spent under $6,000. That included the engine, wiring harness, servo, new cat and some exhaust welding, tuning & Tony's labor. I guess I could have gone 5.3 or ? & built it up but the 6.0 was available and he did it while I was in Chicago for my daughter's wedding. Hope this helps.

Damn! That's nice!

I keep reading stories like this and can't help thinking that I'm a dumb ass....

I spent $4000 putting in a new 0km crate motor from a GM dealer. Then I sign up here and discover something called a 383. I check into it. Yup it was available for only another $1000. Damn, I would have done that....

Now I read that I could have had a complete 6.0 swap in for only another $2k?
I'm a dumbass for not doing my research first....


Anyways, enjoy the new motor!
Pics! Pics! Pics! Pics! Pics! Pics!

 

[az932drkon]

Pix to follow . . .

Thanks for the feedback everyone. If you can't tell by now I'm not not on the Forum each day. I went over budget on this. Could have stayed around $4700 with a stock 5.3. When Tony came across this Vin N 6.0 with over 350 hp/tq I just couldn't pass it up.

 

[bowtiefreak]

In for pics/vids/ truck ****.

 

[WiCK3D_SiX]

Thanks for the feedback everyone. If you can't tell by now I'm not not on the Forum each day. I went over budget on this. Could have stayed around $4700 with a stock 5.3. When Tony came across this Vin N 6.0 with over 350 hp/tq I just couldn't pass it up.

Cant say I blame you, Im looking for a 6.2L but they might be out of my budget, I dont really want to go over 6K so I may end up with an LS1 from a Firebird/Camaro as I can find a parts doner for 3-4K around here.

 

[992dr]

I'd send my Tahoe his way for a 5.3 for $4700. Thats a deal.

PICS PICS PICS oh and vid

 

[blackcoffee]

**** I'll have the 6.0L by wednesday if all goes well. Wheres this dude at?!

 

[az932drkon]

Pix finally

Wow. You guys are a lot more agressive that those on the Corvette Forum. Here are my pix. What I started with (350TBI) and the finished (6.0) product. Tony can be reached at 480-921-4170 & will have a booth at the Good-Guys Show at Scottsdale, AZ in November. Please remember what your goals for performance and budget maybe be different then what I did for my Yukon. Good luck.

 

[05Yukon23]

Nice! I wanted to do this to my 95 Sierra but money issues came up and I sold it.

 

[WiCK3D_SiX]

Wow. You guys are a lot more agressive that those on the Corvette Forum. Here are my pix. What I started with (350TBI) and the finished (6.0) product. Tony can be reached at 480-921-4170 & will have a booth at the Good-Guys Show at Scottsdale, AZ in November. Please remember what your goals for performance and budget maybe be different then what I did for my Yukon. Good luck.

we're not aggressive, we're hard core

 

[SunlitComet]

 

[K-DuB96]

That looks pretty sick Az!! I can't wait until I can do this to my '96 Tahoe. Hopefully I can find a mechanic in the Dakotas/Minnesota area who is willing to do it.