Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Looking for all the lifted tahoe/yukons 4ins and lower. Want to see pics and no what your working with. I want to see what it looks like before i order my lift.
heres mine with 3 inch blocks and the stock torsion bars cranked almost all the way, theres still almost half in inch to go on the t bar bolts but im not gonna push them any further lol, i also just did this yesterday, im ordering new shocks this weekend, stockers are too short now
My suburban has the fenders at the same height all around, but it looks raked. My tahoe sits almost 2" taller in teh front and looks level.....the body lines make them look raked. That is why many lifts lift 6 up front and 4 in the rear and they still look raked sometimes
mine is also on a incline so it looks a lot worse, with 2.5 you could probably be level, mine has a tad bit of front rake but i like it that way for some reason, but its definitely tall, i guess i didnt think about how much 3 inch blocks really are haha
here's mine. it's a 6in rcx but i only had it at about 4 when i took these pics. had to replace the rear springs before i could install the aal. sitting on 33-12.50-15.
have since finished lifting her to the full lift. no pics of that yet.
i just bought my hoe in September of this year and want to do a little more lift on it. it only has a 3inch body on it right now(dont judge me i bought it like this) with 35/12.50/17 cooper stt on moto metals. only other things ive done to it is cherry bomb exhaust dumped in the back, and a full alpine stereo system with the digital media deck and a 12'' type X. i want to do the 2-3inch rough country on it but ive heard bad things on here about it. also want to do captain chairs in the back like the front seats. just wondering if anybody could give me some advice on what to do.
---------- Post added at 12:36 AM ---------- Previous post was at 12:32 AM ----------
this is it as it sits now, and i want a bigger lift, ranch hand bumpers, train horn, the rack on top which i cant find anywhere, tow mirrors, and to black out the lights and grill
I have 3 inch spacers front and back new coil spring assemblys in the front and shocks and I swapped for LT spring because I have a Ltz and it had the air ride which I have gotten rid of then I'm running 285/70/17 mud hogs I'm am going up to a 315 which is roughly a 34.4 and I need to know if it will fit??? I am not afraid of a sawzall
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.