3M Di-Noc Carbon Fiber

[denalianyone]

I took a few night shots of my interior with the di-noc carbon fiber done by myself. A bit time consuming but the end results are pretty nice. I finished off the interior with the spokes two days ago. Off to the pics....

The interior is jet black now with the fiber installed. The flash doesn't show off the elegant look as if sitting inside.

 

[BEEMDUB]

nice job! Take some good day time pics I think it will be even more impressive

 

[fiatdale]

Looks great. Glad to see you were smart and have the grain go all the same direction!

 

[denalianyone]

Looks great. Glad to see you were smart and have the grain go all the same direction!

Yea i made that mistake with one A/C vent but corrected that.

 

[NeverSatisfied]

Did you do it with the piece still on or did you take them off? Thinking of doing something similar to mine

 

[soulsea]

You did a great job with the instal ... however is it just or isn't to too blue for that interior?

 

[denalianyone]

You did a great job with the instal ... however is it just or isn't to too blue for that interior?

Daytime pics with out the flash will depict it looking like true black.


Sent from my iPhone using Tapatalk

---------- Post added at 10:30 PM ---------- Previous post was at 10:28 PM ----------

Did you do it with the piece still on or did you take them off? Thinking of doing something similar to mine

Took the pieces off because I had to wrap and tuck them around, cut, & heat. Much easier removing them.


Sent from my iPhone using Tapatalk

 

[Joew311]

That's looks great! Awesome attention to detail.

 

[denalianyone]

Some more pics without the flash to show how nice the match is with the interior.

 

[Los]

Daytime shots look much better.

I did this as well and I also did my bowties all around with it. Very happy with the results.

 

[the_wood]

Looks great, nice work!

 

[MudnRox]

Where did you find the wrap? That looks real nice. I'm looking to do something similar.

 

[denalianyone]

eBay


Sent from my iPhone using Tapatalk

 

[bigrhino]

Looks good.

 

[Denarli]

That looks great! I have the same wood trimmed steering wheel. Can anything be done with that? Can it be removed, wrapped and reinstalled?

 

[NathanJax]

That looks great! I have the same wood trimmed steering wheel. Can anything be done with that? Can it be removed, wrapped and reinstalled?

you can't remove the wood from the wheel.

you can remove the entire wheel to help with wrapping the wood.

 

[Denarli]

you can't remove the wood from the wheel.

you can remove the entire wheel to help with wrapping the wood.

Perfect! Thanks!

 

[denalianyone]

That looks great! I have the same wood trimmed steering wheel. Can anything be done with that? Can it be removed, wrapped and reinstalled?

Yes the fake wood aka spokes can be removed without removing the steering wheel. http://youtu.be/Rxy1UYim3Mk



Sent from my iPhone using Tapatalk

 

[Denarli]

Yes the fake wood aka spokes can be removed without removing the steering wheel. http://youtu.be/Rxy1UYim3Mk

Sent from my iPhone using Tapatalk

Thanks, but I was referring to the wood trim piece that goes around the circumference of the steering wheel, not the spokes.