3/5 on a 2004

[WhoRunIt1475]

Well ive been searching and searching and im going to just go ahead and ask... lol My wheel are just about even with the fenders on the rear. I want to do a 3/5 but im not exactley sure on the offset of the wheels. I dont want to buy a kit and it rub like crazy and pop a tire. Any suggestions?

Also I know ill probley get all kids of different suggestions on lowering kits but which 3/5 would yall reccomend? I'd like to keep it under $500.00 and I also want to keep the ride quality the best I can. Thanks for the help!

 

[thehoe92]

Belltech has been nice for me

pictures of your wheels?

my wheels tuck up in the fender because of negative camber, if you are worried just crank the keys back up

which means get a kit that doesn't have spindles

I have not heard of too many people having problems with rubbing in the rear but if you do its just trimming the plastic fender liner until there is no more rubbing

also you'll probably want to roll the front fenders

 

[WhoRunIt1475]

ill get some pics from the rear in the morning its raining cats and dogs here in florida... Thanks for the input... Just dont wanna f*ck it up!!! LOL

 

[thehoe92]

I know what you mean dude
drivers side on my car is lower than the passengers side, you can't slide your finger between the fender and tire and one day I was in a parking lot hit a dip, heard it scrape hard and it pulled the fender lip down and starting cutting my tire

you will rub the front fender liner with 24's and a 3/5 but thats not as bad as a metal lip

 

[WhoRunIt1475]

Ouch!!!! How bad was the tire or did you catch it before it got too bad??

 

[thehoe92]

it happened once in the parking lot and it wasn't too bad because I knew about it so I was way more cautious on turns then it happened again when I was driving and I didn't know about it and sliced the shit out of my tire all around it