jdanielmego
TYF Newbie
- Joined
- Apr 30, 2025
- Posts
- 2
- Reaction score
- 0
I have a 2021 Chevy Tahoe RST with no accidents 8K miles only.
For the 2 months or so, every single time after 15 min of driving the following warning signs come on, and won't turn off until I turn off the car and start again.
FOWARD COLLISION SYSTEM UNAVAILABLE
SERVICE DRIVER SYSTEM ASSIST
I recently added a lot of third party technology and wiring such as.
- 2 Front LED bars (hardwired directly to battery) mounted underneath bumper, see attached photo.
- 2 Channel Dashcam (hardwired to fuses)
- Baby Monitor Camera (hardwired to fuses)
- Rear Digital Mirror Wolfbox (hardwired to fuses) I unplugged and removed factory rear mirror, not sure if there's a sensor on the factory mirror, as of now the wire is loose. I believe the wire is for the antifog.
- Changed reverse/turn signal and brake bulbs to LED with resistors (still getting "Check Bulbs Sign")
- I also added a front bumper license plate protector (BumpShox) not sure if that's blocking anything. See attached.
Dealer is telling me he can't touch anything until I disconnect everything I did, all the cameras and bulbs. I'm trying to avoid doing that obviously.
I tried unplugging the battery (negative only) and re plugging after 5min to reset. Didn't work.
I tried replacing the F11 fuse. Didn't work.
I tried cleaning the exterior windshield in front of collision camera. Didn't work.
Any advise on what I can do or try before unplugging everything I've done?
Changing the battery for a performance one perhaps?
For the 2 months or so, every single time after 15 min of driving the following warning signs come on, and won't turn off until I turn off the car and start again.
FOWARD COLLISION SYSTEM UNAVAILABLE
SERVICE DRIVER SYSTEM ASSIST
I recently added a lot of third party technology and wiring such as.
- 2 Front LED bars (hardwired directly to battery) mounted underneath bumper, see attached photo.
- 2 Channel Dashcam (hardwired to fuses)
- Baby Monitor Camera (hardwired to fuses)
- Rear Digital Mirror Wolfbox (hardwired to fuses) I unplugged and removed factory rear mirror, not sure if there's a sensor on the factory mirror, as of now the wire is loose. I believe the wire is for the antifog.
- Changed reverse/turn signal and brake bulbs to LED with resistors (still getting "Check Bulbs Sign")
- I also added a front bumper license plate protector (BumpShox) not sure if that's blocking anything. See attached.
Dealer is telling me he can't touch anything until I disconnect everything I did, all the cameras and bulbs. I'm trying to avoid doing that obviously.
I tried unplugging the battery (negative only) and re plugging after 5min to reset. Didn't work.
I tried replacing the F11 fuse. Didn't work.
I tried cleaning the exterior windshield in front of collision camera. Didn't work.
Any advise on what I can do or try before unplugging everything I've done?
Changing the battery for a performance one perhaps?