PG01
Supporting Member
Be nice to Rene, he’s the man for parts.
2015 Tahoe LTZ - cowl cover/rubber seal replacement
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
shouldn't be hard to do you just need the little tool to pull the wiper arms off without destroying them
As an Amazon Associate we earn from qualifying purchases.
The 16 I bought my wife has a little warping it's been a California car, my 18 Silverado has no warping but seems to be a slightly different design and is a z71 so the cowl sits up higher otherwise it almost looks like it would fit, not sure if the Tahoe/burb z71 hoods are different or not from a lt/LS might be worth digging in to or see if there is a newer revision. It does look like it could be glued down but would take a little work
Ask @swathdiver about his solution.
www.tahoeyukonforum.com
Useless Information
The long terms are simply a function of the short terms. Think of the short terms as what your truck is doing as an immediate response the the data, and the long terms as a large scale compensation. Watch the short terms at idle. What do they do when you hit the gas?
www.tahoeyukonforum.com
Sparksalot
Supporting Member
While we’re talking cowl and wipers, do any of ya know what the part number is for the cover for the wiper arm nut?
the left side was missing when I bought it.
As an Amazon Associate we earn from qualifying purchases.
No idea but I bet any local auto wrecker will have one
Beat me to it. Salvage yard freebie.
Sparksalot
Supporting Member
thanks!
OP
OP
2015LTZ
Member
- Joined
- Sep 6, 2023
- Posts
- 43
- Reaction score
- 29
FR675084
