Kracker714
TYF Newbie
I replaced the ignition in my 2001 yukon xl, and also the computer, and it still wont start. The ignition and computer I replaced came from a 2002 suburban. Any help would be greatly appreciated!
2001 yukon xl Ignition Replacement
- Thread starter Kracker714
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Welcome.
- Joined
- Dec 8, 2016
- Posts
- 4,205
- Reaction score
- 5,545
Welcome from Miami Beach Brad!
did you do a relearn of the key & passlock system?, since you replaced the computer not sure if you can do the 10 minute relearn, you may have to call a locksmith, or have it reprogrammed by the dealer.
OP
OP
Kracker714
TYF Newbie
Yeah i tried the 10min thing before i replaced the computer and it didnt work. Do you know how many times you have to do the 10 min thing? I've heard once and ive heard 3
IT'S 3 TIMES
OP
OP
Kracker714
TYF Newbie
Ok cool! It also says have the battery fully charged, will having my battery charger connected at the same time affect it?
As long as you don't mess with the power while doing then you should be fine
Tonyrodz
Resident Resident
Pretty sure you can't use that used computer. It's not vin'd to your Yukon. You probably will need to get the computer flashed for YOUR vehicle.
Similar threads
