14 bolt rear quick!

[Donnie Yukonie]

i found a 14 bolt rear complete drum to drum with rims and tires that came off a 86 chevy for 125 bucks worth it???

 

[ChrisAU]

8 lug or 6 lug?

 

[Donnie Yukonie]

8 lug i know i would need a 8 lug front SAS to run the same rim

 

[noJeepshere]

$125? worth it. If you're doing a SAS. That axle is on an old square body Chevy, so the axle mounts will be different, no ABS compatibility. It will work, but if you're going to keep your Yukon IFS in front, I'd look for a newer 14 semi-float axle you can convert to 6-lug.

---------- Post added at 10:17 AM ---------- Previous post was at 10:11 AM ----------

8 lug i know i would need a 8 lug front SAS to run the same rim

Not going to work. I looked into that and the amount of fabrication required to make the 8-lug stuff fit was tremendous. The 3/4 ton hub don't just bolt on, because the cv shafts are different, the 3/4 ton cv shafts don't fit because the mounting flange at the axle is different because the axle is different. And, since the axle is different, you need to put the 3/4 ton front axle cradle in. So you can see what I'm getting at.

EDIT: guess I should read slower, first time through my brain put IFS for SAS. Solid Axle Swap? if you got the money and the time, go for it.

 

[_Dylan_]

125 is a good price for a 14bff, but its going to take some work to swap in.

A 6 lug 14bsf is an easier swap.

 

[Donnie Yukonie]

yea i think im just going to save the headache and wait for a 6 lug besides i need to quit spending my tire money lol

 

[Fishintahoe]

yea i think im just going to save the headache and wait for a 6 lug besides i need to quit spending my tire money lol

Yea buddy... save those dollar bills for some new rubber.

 

[Donnie Yukonie]

yea sad part is i have 4 brand new 18 inch kmc revolvers sittin in my closet , and i keep finding shit i "need"

 

[purple 'hoe]

If it was me...I'd find myself a 14 bolt before I'd buy larger tires. You can gear that axle then, and never have to worry about the 10 bolt blowing up on you

Also, a 14BFF can be converted down to 6 lugs.

http://www.gmfullsize.com/forum/showthread.php?t=85276

 

[Fishintahoe]

yea sad part is i have 4 brand new 18 inch kmc revolvers sittin in my closet , and i keep finding shit i "need"

Man, ur truck is gonna look bitchin... cant wait to see it.

 

[noJeepshere]

Yeah get on it with the tires already, I am tired of looking at your "pinched waist" on your Yukon with the lift and tiny tires.

 

[Donnie Yukonie]

Man, ur truck is gonna look bitchin... cant wait to see it.

thanks i hope so trien to do somthing different

Yeah get on it with the tires already, I am tired of looking at your "pinched waist" on your Yukon with the lift and tiny tires.