1/2 on factory LTZ 20's

[Vortecmass]

I want to drop my HOE with Belltech 1" front 2" rear, question will these look good on factory ltz 20's? I use my truck for work and always carry heavy stuff so i dont want any lower. Should i go with 1/2 or 1/3 drop?

Does anyone here have pics of these installed on factory 20's?

Thanks

 

[Goodinblack]

A 1/2 drop looks great

A member Jmat has this setup

I have a 2 inch rear only on my suburban on 20s

 

[07Burb]

IMO I'd just to the 2" rear drop and call it good. I don't see much point in going through the effort of dropping the front just 1".

 

[NORCAL SS]

I want to drop my HOE with Belltech 1" front 2" rear, question will these look good on factory ltz 20's? I use my truck for work and always carry heavy stuff so i dont want any lower. Should i go with 1/2 or 1/3 drop?

Does anyone here have pics of these installed on factory 20's?

Thanks

just a heads up for a 0-2/2 kit any questions just ask
http://www.tbssowners.com/store/index.php?act=viewProd&productId=187

 

[Vortecmass]

Does Anyone has any pics?
Thanks

---------- Post added at 01:31 AM ---------- Previous post was at 01:30 AM ----------

just a heads up for a 0-2/2 kit any questions just ask
http://www.tbssowners.com/store/index.php?act=viewProd&productId=187

$525 shipped sounds good to me.
I will let you know when im ready.
Thanks.

---------- Post added at 01:32 AM ---------- Previous post was at 01:31 AM ----------

just a heads up for a 0-2/2 kit any questions just ask
http://www.tbssowners.com/store/index.php?act=viewProd&productId=187

$525 shipped sounds good to me.
I will let you know when im ready.
Thanks.

---------- Post added at 01:33 AM ---------- Previous post was at 01:32 AM ----------

just a heads up for a 0-2/2 kit any questions just ask
http://www.tbssowners.com/store/index.php?act=viewProd&productId=187

$525 shipped sounds good to me.
I will let you know when im ready.
Thanks.

 

[Jmat]

A 1/2 drop looks great

A member Jmat has this setup

I have a 2 inch rear only on my suburban on 20s

Actually my set up is 1.5 front 2 rear. Went with the Belltech struts in front which allow a max of 2 inch drop in 1/2 inch increments and Belltech 2 inch leveling springs for rear. Truck rides great with ZERO rubbing, even when loaded with eight adults. I don't tow anything so I really can't speak to that. Got the kit from Tony. Hope this helps.

 

[Vortecmass]

Actually my set up is 1.5 front 2 rear. Went with the Belltech struts in front which allow a max of 2 inch drop in 1/2 inch increments and Belltech 2 inch leveling springs for rear. Truck rides great with ZERO rubbing, even when loaded with eight adults. I don't tow anything so I really can't speak to that. Got the kit from Tony. Hope this helps.

Nice looking truck!
Thanks for the pics.