01 Yukon Denali Build Thread

[drdave81]

OK, I went and ran it with Dragy again lol. Before and after times below. I had the cat back and CAI before, they were on when I bought it. The after times are with a BTR Stage 2 cam, long tubes, rebuilt trans, and a Blackbear Tune. I'm pretty happy with the gains, it's a lot more fun to drive now. Once I'm empty, I'll refill on premium, reflash and run it again to see how much of a difference just going from 87 to 93 octane makes. One big help was the 30 degree difference in temp from last time I ran, so that will play into this a bit.
Before > After
0-60 8.4s > 6.51s
60' 2.55s > 2.19s
330' 6.9s > 6.11s
1/8 Mile 10.49s @ 68.95mph > 9.42s @ 74.58mph
1000' 13.54s @ 80.49mph > 12.24s @ 86.53mph
1/4 Mile 16.13s @ 86.34mph > 14.65s @ 92.77mph

 

[Rocket Man]

For audio, on my 02 Denali I’m running what I call a hybrid system- the Lux amp is great for running all the speakers less the sub. So i have a Pioneer head unit connected to the Lux amp with a PAC harness and steering wheel control interface running some inexpensive JBL 61/4’s in the doors and the stock tweeters and far rear pillars and the Pioneer is running a mono sub amp and a JL 10” sub in a stealth box. That way I utilized the stock wiring except adding wiring for the bass sub. There’s a write up somewhere in my build thread but I’m not sure where. There’s a link to the thread in my signature at the bottom of my posts if you’d like to look. Beware though- there’s a lot of really nice expensive things like superchargers, Wilwood brakes and the like that in there might temp you to spend more money.

 

[drdave81]

Haha, oh I'm well aware. I've seen your build thread!!!! Only a lot jealous of yours.