Search results

  1. brh11

    Are my body mounts bad?

    Heys guys, Posting because I'm trying to figure out if my body mounts are bad Having a hard time finding any info on steps to determine if they are the culprit, would like to know before dropping $300 on a kit Ive replaced the entire front end including, new control arms,shocks,springs tie...
    • brh11
    • Thread
    • body mounts
    • Replies: 2
    • Forum: Exterior
  2. brh11

    Front right occasional loud bang/clunk

    Front end experiences really inconsistent harsh bumps in the road that seem to appear randomly I have checked everything, sway bar(bushings, links) ball joints, TRE, new springs both sides and shocks are good The ride is really smooth over most bumps and has no problems, but it seems when the...
  3. brh11

    Front end rebuild Harsh over bumps

    Nope disconnected the electrical on the top of the shock Sent from my iPhone using Tapatalk
  4. brh11

    Front end rebuild Harsh over bumps

    Nope didn’t spin the rod but got some news Breaking out the scan tool on the morning drive brought up some questions.Graphing the results on the front 2 shocks damper command I’ve found some odd results The shocks seem to only have 3 values that they are damping the first about 18-25% for...
  5. brh11

    Front end rebuild Harsh over bumps

    Just checked and nope no codes for the suspension Ride is definitely worse then before, the whole front end ball joints and everything was in horrible condition previously so hard to tell exactly what was causing it but yeah feels like going over bumps that the whole front end is slamming down...
  6. brh11

    Front end rebuild Harsh over bumps

    Well here are a few details I used everything from moog parts besides Delco factory electronic shocks and new r&p Alignment guys said nothing but I have faith in it being either coil springs or tires. Coils looked pretty good when putting them on but I have a sense they might just be worn...
  7. brh11

    Front end rebuild Harsh over bumps

    So I finished rebuilding the entire front suspension down to everything but the knuckle and hub. But going over bumps or especially speed bumps it feels like the front end is slamming into the ground from how hard the impact is. I can almost feel every little bump and big ones just have such an...
  8. brh11

    Door alignment problems

    Got it thanks guys! Sent from my iPhone using Tapatalk
  9. brh11

    Door alignment problems

    Hey guys I’m trying to get the door I bought from the dealer installed but having a few issues. Done some fiddling but it seems door is still to close at the top and in to far on the bottom. Harder for pictures to capture it but hopefully it shows Sent from my iPhone using Tapatalk
  10. brh11

    Steering wheel postion sensor

    Hey everyone I'm currently in progress of a complete rebuild of my front suspension and having a difficult locating a suitable steering wheel position sensor for the one I broke a few months ago:emotions122:. It seems that the sensor in NNBS vehicles from 2007-2009 are...
  11. brh11

    Part interchangeability

    Hey guys. These past two weeks haven't been too kind on the old Denali as I suffered a collision on the drivers front bumper and fender as well as both passenger doors and the passenger fender. I've found multiple Tahoes, Silverados etc that have great parts but I'm a little...
  12. brh11

    Weird Cranking issue

    I have a weird starting issue that only seems to happen when I let the truck sit for more than 10 minutes.I'll try to add a video but it seems to either crank more then it should or idles super low then catches up to normal. New spark plugs, oil replaced but starter seems to be good when...
  13. brh11

    Possible Case of A Going Alternator?

    For the past while now I've been having some strange issues popping up, The unbearable whining noise that is driving me nuts and some odd flickering of interior and exterior lights. Even with my amp and second battery unplugged the same thing happens which leads me to think about the...
  14. brh11

    Horrible fuel economy now?

    Today about midway into my morning commute,I happen to glance over at my Average fuel economy.I know that it is not a completely ideal reference point but still it wasn't normal.I usually get close to 20MPG but today I was getting up to 10 after a reset.Engine seems to be running good but after...
  15. brh11

    OEM backup camera wiring

    Hey I Figured I would try to help out if your still looking for info on this.I have access to a great database for everything on the these SUVS Here is s what I found for the camera output.This is for a 2009 Yukon so It should be the same. Hope I helped!
  16. brh11

    Spark plug help

    I reinstalled them but haven't had a chance to run it. I've been a little paranoid on the whole metal shavings thing. I ran the engine once to try and flush it out. But she didn't like missing two plugs so that didn't last long. I ended up using a PC can duster to blow it out. No shavings came...
  17. brh11

    Spark plug help

    So what ended up happening is that when I tried to remove the one. The actual nut on the spark plug broke off from the metal.So the porcelain part was just turning inside of the spark plug.But mean while the threaded part was still. So I ended up just pulling and twisting it off,blowing out the...
  18. brh11

    Spark plug help

    Alright guys here's an update. I successfully got both of those spark plugs out. No rethreading or anything like that and I made sure no metal shavings. So a disaster was avoided. Sent from my Nexus 6P using Tapatalk
  19. brh11

    Spark plug help

    Yes it does so I'm thinking of doing the same thing and breaking it off like the other one. Also for the ceramic, nope I started the engine up, made a loud noise but the ceramic ended up blowing out of the spark plug perfectly. Also to be sure after I removed the spark plug. I ran the engine to...
  20. brh11

    Spark plug help

    Sorry for this super late update. I ended up having to put the project on hold for a little bit. But yesterday I was able to finally get 1/2 out. I used a #5 screw extractor attached to a 3/8 extension which then was forced into 12mm socket. After I got it to sit it came out so easy with some pb...
  21. brh11

    Spark plug help

    Okay great I'll give that a shot today and report back Sent from my Nexus 6P using Tapatalk
  22. brh11

    Spark plug help

    Here's some pictures
  23. brh11

    Spark plug help

    Completely forgot about that. I'm home in about 2 hours then I'll send it. Thanks Sent from my Nexus 6P using Tapatalk
  24. brh11

    Spark plug help

    Hello Everyone I recently decided to change my 09 Denali's spark plugs.Having changed many spark plugs on other things I knew I would be able to.The first three plugs on the right side came out just perfect.Pulled out in the socket and put new ones back in perfectly.The...
  25. brh11

    Power wheel tilt completely dead

    So I just finished installing my new setup with 4 channels and subs. I put everything back together and I go to tilt the wheel and its completely dead. I didn't touch any electronical near it, just ran some power wire in front of the steering column. If anyone has any input that would be great...

Forum statistics

Threads
129,239
Posts
1,812,656
Members
92,342
Latest member
Brian12019

Latest posts

Top