Search results

  1. drdave81

    Idiots Are Everywhere!

    Yep, definitely have them do it now. Or it'll cost you more later on
  2. drdave81

    Exhaust Options

    Most cat back systems don't have a converter with them. They start behind the cat. At least any of the ones I've looked up for our vehicles, or any other vehicle. I wasn't sure if anyone was running an ORY with a different exhaust system to keep things quiet. I'll probably have to just...
  3. drdave81

    Exhaust Options

    I'm planning and starting to get parts together for a spring top end build on my 01 Denali. I've decided to go with 5.3 long tubes and then replace the existing magnaflow catback with a 5.3 cat back. The whole exhaust system can be replaced much cheaper than just buying 6.0 specific long...
  4. drdave81

    Window switch LED conversion, now no power for switch lights

    Yeah I know the polarity of them, just turns out some of these were presoldered incorrectly. The first few were fine and I didn't check each one
  5. drdave81

    Window switch LED conversion, now no power for switch lights

    Turns out the cheap LEDs I bought were a mix and match of the resistor being wired to the wrong side. Got them all wired up right and now they work. Lesson learned, don't buy cheap stuff lol.
  6. drdave81

    Window switch LED conversion, now no power for switch lights

    I was changing all my switches over to LED per ScottyBoy's thread. I did the driver master switch last and went to hook it up no LEDs came on. Double checked that I soldered everything, looked good. Took a test light, with interior lights on, and no light between the brown wire and black...
  7. drdave81

    Build thread: Project Redfire

    You were in the exact junk yard I was in looking for the same fans. Just beat me to it by a couple weeks it looks like lol.
  8. drdave81

    Need advice on which brand of ball joints to buy.

    I've never had an issue with Moog Problem Solver line on any vehicles.
  9. drdave81

    DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

    So it finally came down to, they're just going to let me return the kit. The only thing they did was come back with some pictures of their own stuff and then said "you have a lot of aftermarket parts on here and another brand of shock, with that I am not sure about fitment. We have not tested...
  10. drdave81

    2003 Yukon/Newbie on the form

    Lots of vehicles have that resonator in order to keep the intake air quiet. Your average vehicle owner doesn't like additional noise, like a sucking noise on acceleration or in some cases a buffering sound.
  11. drdave81

    Replacement motor questions but hopefully fixable

    Reading into this a bit, what made you think you had spun bearings, and then went to a misfire? Is there a knocking sound? Not to sound rude, but you seem to be all over the place with this. Spun bearings, ignition issue, fuel issue.............. Before you go throwing parts at it, do you...
  12. drdave81

    DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

    ks03, I did try that (didn't grab pictures of it). It's the same thing as the driver side. It'll either be jammed up against the shock or be just a bit off. Which looks like if the piece was welded more on center, it would bolt right up. I haven't heard back from DJM yet though.
  13. drdave81

    DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

    So here is the sway bar bolted up to the pass side sway bar. There are two pics of the driver side end link flipped both ways. One way it will bolt up, but pushes the sway bar into the shock. Flipped, the sway bar won't bolt up to either the driver or pass side end link. Which leads me back...
  14. drdave81

    DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

    OK, after getting back under there, flipping the driver side won't matter since I think the passenger side link is still welded wrong. The passenger side link will still be in the same position, unless I put serious tension on the sway bar, which will end up snapping an end link. The passenger...
  15. drdave81

    DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

    I don't have a shot of the driver side currently, but that's how I was trying to bolt it up, was on the right side of the driver side link, as you're looking at it. Just as their picture showed. I may try it the way the other picture you attached shows, flipping the link and seeing if that...
  16. drdave81

    DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

    OK, slow to follow up on this. I talked to DJM and they basically said the link looks fine. So, I tried reinstalling. Lifted the rear of the vehicle, axle sitting at ride height. Shifted the bar over to the new mounting spot on the driver side. Installed the driver side link and it shoved...
  17. drdave81

    Another P0300 Thread

    Just wanted to update, in case anyone else finds this in a search someday. About 2 weeks and several hundred miles later, the light still hasn't come back on. Cam/Crank Relearn did fix it. Though it lets me know I have a timing chain replacement coming up in my future at some point.
  18. drdave81

    Another P0300 Thread

    I ran the cam/crank relearn. I noticed the misfire counter doesn't count up as fast anymore, but still counting them. At almost 200k miles, I'd almost assume some may be normal. So far no light on, but I haven't been driving a whole lot. I'll report back if the code does come back.
  19. drdave81

    Another P0300 Thread

    No other codes, other than the first time I checked codes, there was a stored P0440. That hasn't come back since though, which has been a few weeks now. I'll try a relearn tomorrow, see if that helps.
  20. drdave81

    Another P0300 Thread

    the screen shots from the graph is live, I can monitor them as they happen. Different cylinders count more misfires each drive cycle, as you can see. Each screen shot is a completely different drive cycle.
  21. drdave81

    Another P0300 Thread

    It's an 01 Yukon Denali. No power loss or noticeable issues when driving. The light comes on at different times. It's come on at first start up and also in the middle of a drive, not any hard accels. The misfire monitors start counting as soon as it's started, warm or cold. I haven't done...
  22. drdave81

    Another P0300 Thread

    Unknown age of those. I picked this up last Oct, haven't changed either of them since everything seems to be reading within specs on both sensors. I sprayed around the intake and vacuum lines with brake cleaner, no fluctuation of RPMs at all.
  23. drdave81

    Another P0300 Thread

    It comes on a few trips after clearing it. I replaced plugs and wires. I've tried both .060 and now .040 gap plugs. NGK TR5 currently. Wires are Taylor. Fuel pressure is low 50s at key on, engine off, holds pressure. Fuel pressure running is high 40s. Reading the misfire graph in Tech2...
  24. drdave81

    DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

    Those are on the way now that they're back in stock.
  25. drdave81

    DJM Sway Bar Link and LCA Relocation Kit Doesn't Fit

    I had seen that as well, I figured it was a stock photo as well. But zooming in on it now, the instructions show RK2000, which is the same part number as what I ordered and received. I'll reach out to them today and see what's up.

Forum statistics

Threads
138,101
Posts
1,999,136
Members
103,029
Latest member
brice715

Latest posts

Back
Top