Search results

  1. AlejandroDinero

    HELP W/Billet Upper Control Arms Installation with New Lift

    So the pig has been sitting for over a year and now I have to do something with it. I got the lift on and everything and purchased some KSP heavy duty tie rods along with some new billet upper control arms. My issue is they didn’t come with any instructions door. Does the company seem to...
  2. AlejandroDinero

    I Think I Just Hit The Jackpot Today!!!

    I just happen to be on Facebook that once in the five years I get on the check absolutely marketplace and nothing else and the guy posted. The Lift brand new in the box only open to take pictures. $500 an hour away. Need to say I’m on the way back With the lift did I do decent?
  3. AlejandroDinero

    So 4'' Spindles,Cognito UCA,Bilstein 5160's, and 3'' Spacers DONE

    So last time i posted was right after i installed my 3" Lift Spindles and i had a issue that for the life of me i couldnt figure out. Since then, the truck has set and basically I contemplated on what I was gonna do. Well, I ended up completely redoing everything (3" Spindles) and adding some...
  4. AlejandroDinero

    Need Some Verification On Some Tubular Upper Control Arms

    Found these instead of dropping 500 or so on some Kryptonite Uppers.These look identical to the cognito control arms.I wanted to be sure before ordering them but im sure they will work Tubular Uppers
  5. AlejandroDinero

    Blessing My Brothers With GM 1999-2006 Chilton Repair Manual

    My Brothers I Should have posted this gift earlier but anyway here yall go..if any issues with link lmk Decryption Key: rvhDBfHW70Je2qobY9r2uURyUV255pkLnpJdxdEKWLA GM 1999-2006 Chilton Manual
  6. AlejandroDinero

    HELP Soldering New LEDs To Cluster Possible Issue

    SO WHAT HAD HAPPENED WUZ..before I got a schematic of positive a negative sides. Then while installing blue leds in my cluster, this had happened. I got sloppy and the board got hot and now I don’t see anywhere still that I can solder my new leds to. Anybody have any help or tricks I could use...
  7. AlejandroDinero

    Seriously WTF Spindle Issue Still

    This is blowing my mind I haven’t even got to drive the hoe since I put the spindles on. It’s like the tires want to go random directions even at idle. Tomorrow I’m going to take everything apart and I guess redo it hoping that may address the issue. So I seriously haven’t fixed my issue even...
  8. AlejandroDinero

    Ridiculous positive camber after lift spindles install

    So I put my spindles on finally and once I got everything back together I noticed I had a huge amount of positive camber. So then I decided and remembered I still had my bars cranked up and decided to decrank them and I still have a good amount to the point where I don’t even want to drive it...
  9. AlejandroDinero

    Are These Real Depo’s?

    I’ve been looking to get a set of depo’s and came across these on eBay. Any input would be greatly appreciated.
  10. AlejandroDinero

    Factory Navi Question

    So I just picked up a factory Navi unit#15230099 on eBay for 50 shipped. I have the factory RPO code UQ7 setup. This unit should work correct? Think I got a okay deal on it
  11. AlejandroDinero

    Silverado Lowering Spindles On Tahoe

    Anyone know if some lowering spindles for a 99-06 2wd Silverado will work on my Tahoe I found some for a steal locally
  12. AlejandroDinero

    Snatching Out The Whole Kitten Caboodle

    My 06 LT with Autoride junk is completely blown out like Richard Simmons Butthole and want to snatch it out since it’s not serving any purpose at all just dead weight. Obviously I will get a code thrown which I can handle. I plan on ordering 4” rear coils and 2” Spindles And replacing shocks...
  13. AlejandroDinero

    Been A Hot Minute So..

    I haven’t posted any pics since I did my Tint, Got Some New Headlights and LED Taillights, 315’s with Crank. It’s Decent Out And I Washed Her The Other Day So Here She Goes..Wanting To Drop Her Down Next Since Coming Up On 200k.
  14. AlejandroDinero

    GM Build Sheet Help

    So I was reading where people were paying to get their build sheets and that’s not cool when I paid 0.00 and just sent a email. I emailed [email protected] with my VIN and request for the build sheet. I got a response and a pdf of my build sheet two days later. Worth a shot to shoot them an...
  15. AlejandroDinero

    Hitting The Big 200,000 Mile Service

    My Hoe is about to hit the big 200,000 miles and it’s time. We bought her a year ago so have no true to my knowledge work done on it. As far as I’m concerned what I was told was done is hear say. I got a little list going on so any help would be appreciated on anything else. As for injectors and...
  16. AlejandroDinero

    window trim removal for tint installation

    im giving my shot at a pre-cut window tint kit i got and cant find anything on how to remove the window trim for the rear and front panels. any help would be greatly appreciated. i got all of my door panels off to keep water problems down and taped up
  17. AlejandroDinero

    Got Some New Bigger Meats

    The Hoe Got Some 315/70 Cooper Discover AT3’s Today, Lookin Way Better! Only Had To Trim A Very Small Piece Of The Front Bumper.I Would Have More Pics But Rained All Day. Now Looking To Throw Some 1 inch or 1.5 inch Rear Spacers.
  18. AlejandroDinero

    Speaker Grille Issues

    Anyone have any advice or tricks for getting these things to stay in place? Is there other options besides these? They are a major pain in the
  19. AlejandroDinero

    Need Help Lowering My 06 W/Autoride

    So I decided to go a different route with my hoe. Got rid of the keys and my 35’s already. I have autoride and want to go at least 3/5 on 26/28’s until I can get the ride tech setup. After researching about this autoride junk seems like a huge P.I.T.A. I came across some coils for the rear and...
  20. AlejandroDinero

    Big Screen Double Din

    I’ve been looking at getting a new Double Din with OBD2 capabilities. I’ve came across a couple 10.2 inch screens with good solid reviews. Has anyone installed a big screen like this and was their any issues that came up? On my Double Din I had to remove half my dash to get it to fit and it’s...
  21. AlejandroDinero

    All of a sudden I hit Issue City

    So for one my drivers rear window is stuck half way down. When I hit the switch I hear a real low high pitched whine for a second. Can you replace just the motor? I have no heat front and rear couple days later. I calibrated it to double check and nothing still. I have icy cold ac but no heat at...
  22. AlejandroDinero

    Double Din Install Is Going Down

    So picked this Pioneer AVIC-X920BT for 75 bucks with all connections and I couldn’t pass it up. Yes it is a bit dated but it will do it’s job fine along with navigation. As for the wiring interface module I went with the Metra GMOS-04 since it came to 75 with an employee discount. Tomorrow...
  23. AlejandroDinero

    Bermuda Blue 2006 Tahoe

    Not new to the Fullsize GM’s and this is my second NBS Tahoe. Picked it up due to having twins and wanted to build a Tahoe this time. Only issue is oil pressure is whammed out at 80psi on the cluster.

Forum statistics

Threads
137,788
Posts
1,992,279
Members
102,782
Latest member
Mountain Rambler

Latest posts

Back
Top