It definitely raised the rear but raised the front more to make it closer to level. It’s probably 0.5-1.0 inch higher in the back for me.
Lifted/Leveled 2021 - Postem Up
- Thread starter DWSmoot
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Firstly, thanks to all for posting your rides and going through all of the ins and outs of your lifts, fitments, etc. Lots of good looking vehicles on this board that led to the update of our new Yukon. Again thanks.
Secondly, to show my appreciation and to provide you all with some additional information to help those in the future, please see the pics of our completed lift and tire update. I'll post pictures of the front fender liner / tire clearance after alignment. It is close and may rub through suspension travel but nothing that I can see so far during normal commuting, bear in mine we only have put 40 miles since install/alignment
2023 Yukon SLT 4wd (coil suspension)
2" Rough Country spacer lift
285/65R20 Mickey Thompson Baja Boss ATs
Stock 20" aluminum wheels (no spacers)
Full size matching spare
Full size spare fits but can't see getting anything larger in there without deflating the tire a bit. FWIW.
Secondly, to show my appreciation and to provide you all with some additional information to help those in the future, please see the pics of our completed lift and tire update. I'll post pictures of the front fender liner / tire clearance after alignment. It is close and may rub through suspension travel but nothing that I can see so far during normal commuting, bear in mine we only have put 40 miles since install/alignment
2023 Yukon SLT 4wd (coil suspension)
2" Rough Country spacer lift
285/65R20 Mickey Thompson Baja Boss ATs
Stock 20" aluminum wheels (no spacers)
Full size matching spare
Full size spare fits but can't see getting anything larger in there without deflating the tire a bit. FWIW.
Attachments
olyelr
Full Access Member
Nice setup!
Yea, dosnt look like you can fit any larger of a tire up under there thats for sure. Looks like the frame is clearanced out for the tire from the factory, eh? Ive never looked up under there before.
Can you elaborate on what parts you pulled together to make the frankenstein lift work?
@jarrod22 that turned out great. If you are still watching this thread. Is there a chance you could post some closer up photos and photo looking down the side? Thanks.
EDIT: Well, I think I answered my question. It seems Fuel only makes the Trigger in +1.
Not sure if @WIFFLEHOUSE is still reading this. Can anyone tell me (maybe @nick14226) what offset these rims would be?
Fuel pretty much only makes +1 or +20. I am trying to figure out what the offset looks like from different angles.
Last edited:
Similar threads
