-
-
EI have seen the "water barriers" behind many many a door panel that I have removed. I have removed and did what is needed and then...
-
Eeventsb replied to the thread Rain water leak in both front doors.I know what you're talking about. My Monte Carlo has the plastic sheet in its doors. In these trucks it appears they replaced the...
-
Eeventsb replied to the thread Rain water leak in both front doors.The door seal is new. The leak is coming from the door panel, and leaking down onto the seal from the inside. The window sweeps look...
-
Eeventsb replied to the thread Rain water leak in both front doors.UPDATE Ok I sat in the truck while it was raining with the door panel off and now I can see what is happening Firstly I had it...
-
-
Eeventsb replied to the thread Rain water leak in both front doors.No, just the foam water deflector as shown in the 3rd photo
-
Eeventsb replied to the thread Rain water leak in both front doors.Taping a bubble seems like it could work, now to figure out what material to use to be effective... Just blows my mind that GM thought...
-
EAre those the legs that hold the panel when you loosen the clips? They may hold the panel vertically when attached as well.. Here's my...
-
EI've been dealing with water intrusion through the front doors since the day I brought home my 2013 PPV. First the drains were clogged...
-
-
Eeventsb reacted to Fubar0715's post in the thread Installed aftermarket radio w/ PAC RP4-GM31 interface, Reverse output not working with
Like.
I have an aftermarket HU and camera in my SSV - had to tap into the reverse light wiring to make it all work. I dont remember what... -
Eeventsb replied to the thread Installed aftermarket radio w/ PAC RP4-GM31 interface, Reverse output not working.UPDATE: After trying a second RP4-GM31 and it still not working, and reaching out to PAC support, I have arrived at the conclusion that...
-
Eeventsb replied to the thread Installed aftermarket radio w/ PAC RP4-GM31 interface, Reverse output not working.Yes, it is. I also am confirming with a multimeter on the PAC interface that the purple/white wire does not ever change from 0V. The...
-
Eeventsb replied to the thread Installed aftermarket radio w/ PAC RP4-GM31 interface, Reverse output not working.The PAC interface operates via the CAN bus, there is no "reverse light" wire in the back of the radio. It gets all its inputs from the...
-
Eeventsb posted the thread Installed aftermarket radio w/ PAC RP4-GM31 interface, Reverse output not working in Police Package/Specialty Service Discussion.Hello, This weekend I set out to install a Pioneer aftermarket head unit in my new to me 2013 PPV. I am using the PAC RP4-GM31 radio...
-
-
Loading…
-
Loading…
