No where in there did I mention anything about needing a scan tool to fix the module dont know why you would spin it like I don't know what I'm talking about .
Ya I know about the re solder of broken joints that fix this issue. The dirt bag design of the cover is preventing me from removing it . Thus needing to detach break lines. I'm just trying to figure out if that's worth it or not and the process of removing them. Ya a scan tool once the air gets...
I'm throwing an abs light. Its my abs module from the faulty soldier joints but I can't remove it off the unit to fix. Due to the 4 torx 20 screws not coming off. If I were to pull the lines off so I can repair the unit wondering how to do this the 2 from the master cylinder if the cap is on...
Hey, there is a message center light on permanently it says CARGO DOOR ADJAR its a 2001 tahoe. The pink and black wire connected to one of the plugs going into the bcm is for the cargo door ajar light. Could I tap into that wire while it's still connected to the bcm and run a ground to it to...
My wheels are an inch narrower than my last set I just figured out. I bought the wheels used and it has a multi bolt pattern guy had them on a Ford. Maybee that could be why they don't look right on this, doing this just for looks. The offset dosnt look right the edge of the wheel is like 3...
Hey everybody, my boss has a newer bs suv it's an escalade but dosnt really matter what it is. I noticed he either has wheels that are very wide or he has spacers as his stick out like 2 inches out of his fender. With mine right next to it I have the opposite thing going on my wheels go inside...
Can I please get some help. No power steering at anytime. Fluid is all gone looks to have been sprayed / sloshed somehow over 1/4 of engine bay. It's extremely cold here right now and it's outside so making it harder to check what might be wrong . I have already driven it to store and back...
Hello, trying to break the nut loose on passenger inner tie rod. Its that big one that requires a large Cresent or pipe wrench. Tie rod is so done hanging by a thread inner and outer. My geometry has been screwed up for a long time keys cranked down. When I try to loosen that big nut i get a...
Hows it goin,
I did the wp yesterday. As soon as I turned the key apon completion, im hearing a fairly quite squeal that changes pitch randomly. As well, wen I rev it in park the squeal gets a little louder but not by much . Can't here it when truck is moving.
Should I hv dumped...
Totally good call ! Thanks for everyone's feedback !! I appreciate it ! Prestone slime neon green is what I added in the system and ya good call I went and looked it says comparable with any color..
So left it in going to drain rad , hoses, and what ever is in watetpump when I change the pump...
Hi I did something dumb after truck threw the low coolant light. Pulled over immediately asked the guy at service station who said the coolant i got would work. But I was dumb and put the wrong green coolant in the resevoir it was very close to empty and I topped it off. So fluid wise that would...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.