HID Retro Memoirs NNBS Tahoe/Suburban

[shundal]

At first I thought the left side was dropping down slightly. But now that I looked a little closer it seems to be fine! Must be my bad vision haha.

 

[Goodinblack]

At first I thought the left side was dropping down slightly. But now that I looked a little closer it seems to be fine! Must be my bad vision haha.

Lol okay

 

[NathanJax]

These done yet?

 

[Ben]

 

[Brooklyn hoe]

Hi everyone finally got my lights put on and done here are some pics please enjoy and comment.
lights out (factory lights)

old hid from hid guy

install of ballast and harness

new retros installed

Last buy not least the money shot

 

[Shimmy23]

^nicely done. they look stock!

 

[jebt2921]

Would you mind doing the proper height measurement on the wall if you're happy with how the output is at night?

I did the ultimate rookie mistake and completely forgot to measure so i could adjust upward more and I feel like mine might be pointing a bit low. Anyone with proper measurements on the wall for the cutoff would be greatly appreciated.

And if you do please let me know how far from the wall you are and on level ground. Looks awesome man!


Sent from my iPhone using Tapatalk

 

[chicksdigit]

Hi everyone finally got my lights put on and done here are some pics please enjoy and comment.
lights out (factory lights)

old hid from hid guy

install of ballast and harness

new retros installed

Last buy not least the money shot

Very nice, did you do the retrofit yourself of did you have someone do it? Can you share what components you used if you did do it?

 

[Goodinblack]

Shrouds are all shaved and cut down. Also been properly fitted.

Need to aim them one last time before I seal them. Which means pulling the bumper again

Arrgh

However once that is done...... will be sealed and they are finished.

 

[OHSIXX]

Lee-looking good...sux about pulling the bumper all the time to work on the lights.....they should have carried over to the NNBS how the NBS ones came out

Brooklyn Hoe----looks really nice and clean.....

 

[Goodinblack]

Lee-looking good...sux about pulling the bumper all the time to work on the lights.....they should have carried over to the NNBS how the NBS ones came out

Brooklyn Hoe----looks really nice and clean.....

Thank you

Yes. Its the number one reason I have not finished them in all honesty. The hassle of doing it. I am also eccentric and OCD hahahaahaha

A bad cutoff would annoy me lol

 

[Clean07Burb]

Any more progress?

 

[Ben]

No he's an alcoholic and has a cat

 

[Goodinblack]

No he's an alcoholic and has a cat

 

[Ben]

So you agree?

---------- Post added at 04:19 PM ---------- Previous post was at 04:18 PM ----------

Silence is compliance

 

[Goodinblack]

Ahh well

 

[felixgun]

I've opened this thread so many times and JUST noticed the typo. Surprised Jacob hasn't fixed it yet!

 

[07Burb]

fixed I guess my mind always just completed the word for me and I didn't see the missing "r".

 

[Goodinblack]

Lock nut secured. I used hot glue as a removable alternative to JB Weld.

This is the high strength version.

High beam splitters wired in.

On truck. FINALLY. After 8 months of sitting in my living room.

---------- Post added at 03:38 PM ---------- Previous post was at 03:21 PM ----------

 

[NathanJax]

Looks good!