What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

07Burb

GM fan for life
Staff member
Moderator Supporting Member Administrator
Joined
Jan 3, 2011
Posts
50,943
Reaction score
19,377
i like the first one....
 

Stimpy

TYF Newbie
Joined
Feb 15, 2012
Posts
22
Reaction score
0
Added this.
a6937d4b-591c-7b61.jpg
 

samtman18

Full Access Member
Joined
Sep 19, 2011
Posts
87
Reaction score
1
Location
Yatesville, Ga
if that is the ones available then i would go with the black/polish helos.

Replaced the starter today. thats 2 that i have replaced in the past 3 years. damn chinese/mexican remans! just aint what they used to be.
 

My01yuk

Full Access Member
Joined
Dec 30, 2009
Posts
724
Reaction score
4
Location
Dallas Tx
Installed my sonar LEDs. They look good but I have hyper flash and when I turn on my lights the tail lights don't come on. Turn signal and brake lights work. I was told this brand would just plug any play. Any ideas?
 

chauncey0337

Full Access Member
Joined
Jan 22, 2011
Posts
3,178
Reaction score
32
Location
MLT, WA
Installed my sonar LEDs. They look good but I have hyper flash and when I turn on my lights the tail lights don't come on. Turn signal and brake lights work. I was told this brand would just plug any play. Any ideas?

Earl, they should be plug and play. Did you plug the lights in the correct sockets? It's different than stock configuration.
 

My01yuk

Full Access Member
Joined
Dec 30, 2009
Posts
724
Reaction score
4
Location
Dallas Tx
Earl, they should be plug and play. Did you plug the lights in the correct sockets? It's different than stock configuration.

LOL 2 minutes after posting that I went back and read what you told me about the turn and stop lights. That was the problem. All is good. I feel like a real dumb ass for not reading your PM to me first.
 

chauncey0337

Full Access Member
Joined
Jan 22, 2011
Posts
3,178
Reaction score
32
Location
MLT, WA
LOL 2 minutes after posting that I went back and read what you told me about the turn and stop lights. That was the problem. All is good. I feel like a real dumb ass for not reading your PM to me first.

:slap:



At least it was a minor mistake and nothing serious. Glad you got it figured out. Now prove it!
 

SHWELL

Member
Joined
Feb 7, 2012
Posts
69
Reaction score
1
Location
Florida
Installed Backup Camera setup..

7" screen.
IMG_20120226_151233.jpg



Only thing left to do for this install is find a Reverse activated source for the Screen. My search has drawn a blank so far. Monitor also has dual inputs, so I am thinking of adding a second camera for the hitch location, though this one works fine for it.I also would like to make the Screen mount a little cleaner, but 20 minutes into project the Rains came hard.


Links to iems:
http://www.ebay.com/itm/270872845777?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.com/itm/300558841852?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649


http://www.youtube.com/watch?v=iGn8IB83OkE&feature=youtu.be
 
Last edited:

Kman

Full Access Member
Joined
Feb 10, 2011
Posts
442
Reaction score
87
Location
Southern California
Driving on the freeway I lost power steering, my alt, and water pump. I thought the engine died but it didn't.

Belt tensioner decided to commit suicide as I was getting off the freeway 400 miles from home. Popped the hood to see my belt laying in the engine bay. $75 later, my dad and I were able to swap out the tensioner and belt in the hotel parking lot.

Picture of the carnage:
 

Attachments

  • tensionerdisaster.jpg
    tensionerdisaster.jpg
    64.4 KB · Views: 49

JochenWoern

Full Access Member
Joined
Sep 29, 2011
Posts
2,427
Reaction score
21
Location
Sacramento, CA
Driving on the freeway I lost power steering, my alt, and water pump. I thought the engine died but it didn't.

Belt tensioner decided to commit suicide as I was getting off the freeway 400 miles from home. Popped the hood to see my belt laying in the engine bay. $75 later, my dad and I were able to swap out the tensioner and belt in the hotel parking lot.

Picture of the carnage:

That is some excellent FATHER SON bonding!

---------- Post added at 11:15 PM ---------- Previous post was at 11:13 PM ----------

Went up in the snow yesterday. Unfortunaltely, there is more mud then snow currently in the Sierra Nevadas in Northern Cali.

SOOOOOOO, I had to power wash the mud off of her and then give her a nice bath. :)
 

Kman

Full Access Member
Joined
Feb 10, 2011
Posts
442
Reaction score
87
Location
Southern California
That is some excellent FATHER SON bonding!

---------- Post added at 11:15 PM ---------- Previous post was at 11:13 PM ----------

Went up in the snow yesterday. Unfortunaltely, there is more mud then snow currently in the Sierra Nevadas in Northern Cali.

SOOOOOOO, I had to power wash the mud off of her and then give her a nice bath. :)

Drove from Livermore home today. Think I hit 1000 bugs on the way home. Had to wash the old girl when I got home. Supposed to rain tomorrow. :emotions122:
 

05Yukon23

Full Access Member
Joined
Apr 7, 2011
Posts
832
Reaction score
5
Location
Arkdelphia, AR
Just made the 430 mile trip back from Nashville. Mpg was a little less with all the construction and 2 accidents. 21 on the way up and 19 on the way back. Still happy with it!
 

Forum statistics

Threads
137,815
Posts
1,992,826
Members
102,795
Latest member
Drewphil
Back
Top