01HDtahoeNJN
Shredding Gnar Daily
Sweet I was asking because it says not to cut wires but then you can't splice because there for cut wire idk I'll have to wing it or solder and shrink wrap
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yeah it might be the 'correct' way but I've done that way in the past. Just skin em' back and use some electrical tape and PRESTO-your done. The true audio guys would frown without solder or shrink but hey......
chauncey0337
Full Access Member
Soldering would be ideal but I would advise you to at the least crimp them. If you just twist them together that just adds more resistance and could cause the load resistors to get even hotter.
01HDtahoeNJN
Shredding Gnar Daily
Crimp!?
chauncey0337
Full Access Member
JochenWoern
Full Access Member
Well got my 2 packages from FedEx this am and installed the rest of my stuff. The popcorn should be gone by now fellas.......
(1) Installed new LED's in front parking lamps along with load resistors. I went with these because with the clear housings and filament bulbs--they had a orange tint to them from the bulbs so they didn't look as 'clear' as I wanted them to. Problem solved.
(2) Installed new 'smoked' LED tails from x3 racing.....the ones everyone else has. Was gonna originally tint my stockers but went with these-it gives the rear a whole new look-maybe time for Esky vent caps next
(3) Picked new carpeted front floor mats with 'DENALI' stitched in them. They are from a company called Lloyd Mats.....great quality. Also grabbed a keychain cuz' what the hell
Onto the pics:
LED parking Light Bulbs
'x3racing' LED Tails
Front Floor Mats
That's it....for NOW
-J
Looks AWESOME Jason!!!!! Same smoked tails I have. Hope you love them as much as I love mine!
AND YES, definitely ESKY CAPS, it will look so much better back there.
---------- Post added at 12:49 AM ---------- Previous post was at 12:41 AM ----------
Well got my 2 packages from FedEx this am and installed the rest of my stuff. The popcorn should be gone by now fellas.......
(1) Installed new LED's in front parking lamps along with load resistors. I went with these because with the clear housings and filament bulbs--they had a orange tint to them from the bulbs so they didn't look as 'clear' as I wanted them to. Problem solved.
(2) Installed new 'smoked' LED tails from x3 racing.....the ones everyone else has. Was gonna originally tint my stockers but went with these-it gives the rear a whole new look-maybe time for Esky vent caps next
(3) Picked new carpeted front floor mats with 'DENALI' stitched in them. They are from a company called Lloyd Mats.....great quality. Also grabbed a keychain cuz' what the hell
Onto the pics:
LED parking Light Bulbs
'x3racing' LED Tails
Front Floor Mats
That's it....for NOW
-J
Looks AWESOME Jason, love the smoked tails, same as mine.
Yes, I think definitely ESKY vent caps!!!!!
domin8
Just Plinking
- Joined
- May 9, 2011
- Posts
- 6,038
- Reaction score
- 14
Oil change with Wix filter, synthetic oil, and Lucas oil stabilizer. Installed Sylvania Silverstar Ultra bulbs in high and low beams. Reunited to install GM Accessories auxiliary trans cooler. Cooler is mounted, bury lines are not attached. Won't be able to continue tomorrow because the wife wants to go to the car show. Maybe next weekend, and I'll do a complete trans flush and filter replacement at the same time too.
Sent from my myTouch_4G_Slide using Tapatalk
Sent from my myTouch_4G_Slide using Tapatalk
Thanks man.....yeah I like the 'new' look......can't believe I waited this long to get them....
I agree on new vent caps-just trying to decide between the Esky and the smooth SS ones.....
-J
JochenWoern
Full Access Member
For me, definitely ESKY. I think they just look classier then the smooth ones. But that's only my opinion.
Big Buttons
The SS Burb
Washed her and put my teams sticker on finally.
Installed green LED on headlight switch assembly to indicate when headlights are on... Installed new Katzkin leather seat cover on passenger seat (ran out of time for the others)... installed LED bulbs in the map lights and overhead lights...
Last edited:
01HDtahoeNJN
Shredding Gnar Daily
Biggman sweet!!!
And failed with my hids today
And failed with my hids today
01HDtahoeNJN
Shredding Gnar Daily
05Yukon23
Full Access Member
Windshield wipers and seafoamed the Yukon. Nice smoke show! Not nearly the smoke show that my brother's tundra had for us though. CRAZY amount of smoke from his.
You know what, the ones i recently reviced from DDM for my buddy sierra, does that same exact crap. The headlights come on sometimes, but not so bad, the fog lights come on for about 5 seconds then go off and one side flickers on and off. One side i got working, but the other, is just like your vid. Only one side goes wacko
Wonder if they have a bad batch of ballasts/wiring, (which i have got before, and had to rewire thier stuff)
if you get a fix, let me know.
If you're not running a relay they will do that sometimes. Mine did this until I did relays.
01HDtahoeNJN
Shredding Gnar Daily
Yeah I talked to DenaliAK(scott) and he said try the relay harness they gave you and gave me a link on a very simple how to which ill post here for reference to allhttp://www.ramforum.com/f75/how-wire-up-your-hid-harness-5424/
simple and to the point ill be doing this today as well as installing a led resistor hopefully that goes smoothly
simple and to the point ill be doing this today as well as installing a led resistor hopefully that goes smoothly
Similar threads
