What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Doomsta510]

Hey cameron where did you pick those heim tie rods from?

 

[bottomline2000]

did you install the cognito support system also? I'm wondering as it seems to be a problem solver that I'm considering.

 

[TnTahoe]

Finally got around to fix my A/C, had to replace compressor, drier, orifice tube, condenser, and a new ac tensioner. The hardest part of the entire process was removing and replacing the damn orifice tube. I know I destroyed at least 4 of them before I finally decided to sand it down a lil bit lol. But after i evac and recharged Im blowing snowballs know woohoo. And this was my first time ever messing with an A/C so Im pretty proud of myself.

 

[Physh1]

I picked them up from a some local guys here who have been building them. I'll contact them and make sure it's ok to relay their info.

These are just as good if not better than many aftermarket setups at a much more reasonable price.

Cameron

 

[Tahoewhat]

Replacing my front emblem, due to the f'en idiot kids at jiffy lube. Who slam a hood down from the highest point it goes.

 

[alxs210]

Oil change.

 

[chip]

Chip, you got a pic of the rear, i never thought of painting the tail gate top piece. All the painted peices look good. So you basically drive around w/ all lights on all the time? w/ that mod you did. (why? just wondering.)

I have done nothing to the hoe.. washed it but rained of course. so needs it again.

Here, I was able to take one today:

---------- Post added at 09:10 PM ---------- Previous post was at 09:04 PM ----------

Finally got around to fix my A/C, had to replace compressor, drier, orifice tube, condenser, and a new ac tensioner. The hardest part of the entire process was removing and replacing the damn orifice tube. I know I destroyed at least 4 of them before I finally decided to sand it down a lil bit lol. But after i evac and recharged Im blowing snowballs know woohoo. And this was my first time ever messing with an A/C so Im pretty proud of myself.

Feels GOOD doesn't it?!?!

I picked them up from a some local guys here who have been building them. I'll contact them and make sure it's ok to relay their info.

These are just as good if not better than many aftermarket setups at a much more reasonable price.

Cameron

You've peaked my interest! Group buy?????

 

[Abstrastic]

replaced the 40 series flowmaster with a series 10.

 

[Physh1]

You've peaked my interest! Group buy?????

Haven't heard back yet...I'll let you know...

Cameron

 

[Tahoe06]

Replacing my front emblem, due to the f'en idiot kids at jiffy lube. Who slam a hood down from the highest point it goes.

Exactly why I will never let anyone at any of those shops touch my vehicles. They're too underpaid and undereducated to respect a ride. If I can't/don't want to do it, I have an out of work mechanic brother who is always looking for some work

 

[Physh1]

Anyone interested in the heim tie rods check here...

http://tahoeyukonforum.com/forum/showthread.php?t=17746

Cameron

 

[Cobra]

Had to repair passenger fog light cover and lower valance add on due to some idiot losing cusions off his couch on IH-35. Tried to avoid it but it got me. I wouldn't have thought a cusion would knock stuff loose but I guess when it's comming at you after being run over and I'm going 70ish. Its harder than I thought. It's all right now looks good as new.

 

[chip]

Thanks Cam!

 

[oak510_tahoe]

couple days ago, installed rear flip down 7" monitor. Got it for $49 at Frys.

 

[swtz71]

Well came home from work and actually took her out for a drive ( haven't driven the truck in about 4 days)

 

[BaMaDuDe87]

Put some new wheels and tires on

 

[black95]

wased her up and filled it wit some 93

 

[waxworkz]

i literally washed "half" my sub. well my wife did anyway. trying out some new waterless wash while i was working on a customers car. she said she would finish the other half tomorrow lol

 

[loadedtahoe117]

installed 6K hids in low beams and fogs! looks so filthy!

 

[chip]

Let"s see 'em!