What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Eagle]

I used it to get on the roof so i could power up the swamp cooler.

pulled under the eave opened the sunroof, popped thru it, and stepped up onto the roof. beat the hell out of a rickety ladder.

 

[highrollin113]

well i fortunatly had bought new wires when i did mine this time, but i have run into this problem before and ruined wires, but a trick i was told and i have not tested it, is to take lubricant in a needle, you can get at drugstore, and inject from the top of boot, like i said do not know if it works but i think it could, if you try let me know

 

[1LowHoe]

just lowered the back end of the hoe to were theres just enough room for my index finger haha realllly low now. =] anddd got 2 RF P2 15s cant wait to put em in

 

[thehoe92]

rolled the fenders more

sanded down my bow tie more and put a couple more coats of purple on and installed it

 

[killer20072001]

Drove it

 

[Travieso]

any tips on painting my chevy bow tie ?guys

 

[yukondoit]

Its sitting at home today.

 

[Redhoe01]

Last night I put my billet grill on and put in some sylvania silver stars 35W. Enjoying both new additions to my hoe.

 

[BOSS]

Today I screwed in my Lloyds floor mats fasteners to the new carpet


B

 

[thehoe92]

any tips on painting my chevy bow tie ?guys

light coats

the bow tie has a curve to it so if you put to much on it may look good for a couple seconds until it settles down around the edges

 

[crmzendrgone]

any tips on painting my Chevy bow tie? guys

Light coats like mentioned and use some etching primer first to get you a good base.

---------- Post added at 11:54 AM ---------- Previous post was at 11:53 AM ----------

Trying to finish up my CB placement in the center console.

 

[Travieso]

light coats

the bow tie has a curve to it so if you put to much on it may look good for a couple seconds until it settles down around the edges

i was told i had to take the top layer off which was some plastic then sand down the chrome part and primer and paint that ?

Light coats like mentioned and use some etching primer first to get you a good base.

---------- Post added at 11:54 AM ---------- Previous post was at 11:53 AM ----------

your saying just paint over the original bow tie like dont even prep it or nothing or even sand it down, just throw some paint on it ? what type of paint should i use i want to color match it white..

 

[killer20072001]

Take some wetsand paper like 800 will work well. Get after it. Wash it real well. Rub some alcohol on it. Then use some etching primer. Wet sand the primer with 1200 or 2000 to get smooth. Clean really good again. Spray some white on there. Light coats like mentioned before. You can sand the color if you want with 2000, but sand lightly. Then get some clear on there use lots of clear because it will be on your grill, so its gonna eat some rocks.

First time i did mine.

What i did sunday.

 

[Travieso]

thanks kelly that looks real good. adding this to my mod list..

 

[killer20072001]

Really easy and cheap mod to do, but the white makes a huge difference.

 

[obo]

Yesterday I took off the old tint the previous owner installed. The front windows were purple. No longer tho! very easy too

 

[yargnits]

Drove it to DC with the fam on board.

 

[obo]

hey dave i took a pic of drop with stock wheels, just click on my profile pic

 

[yukondoit]

hey dave i took a pic of drop with stock wheels, just click on my profile pic

What kind of drop is that? 2/3? Looks good man..

 

[gtbigup01]

Changed my oil and rotated my tires. Food is better than fashion